TS EAMCET 2004 Chemistry Question Paper with Answer and Solution

(B) Hydrazines react with alkanones through an addition-elimination reaction to form hydrazones.
Specifically,phenylhydrazine $(PhNHNH_2)$ reacts with an alkanone $(>C=O)$ to produce a phenylhydrazone $(>C=N-NHC_6H_5)$ and water $(H_2O)$:
$>C=O + H_2N-NHC_6H_5 \rightarrow >C=N-NHC_6H_5 + H_2O$
Thus,$PhNHNH_2$ is the correct reagent.

(C) Amines react with an excess of alkyl halide to undergo exhaustive alkylation,resulting in the formation of a quaternary ammonium salt.
Among the given options,$C_6H_5NH_2$ (aniline) is an amine,which reacts with excess methyl iodide $(CH_3I)$ to form a quaternary ammonium salt.
The reaction is as follows:
$C_6H_5NH_2 + 3CH_3I \rightarrow C_6H_5N^+(CH_3)_3I^- + 2HI$

(C) The capacitance of a parallel plate capacitor without a dielectric is $C = \frac{\varepsilon_0 A}{d}$.
When a dielectric slab of thickness $t$ and dielectric constant $K$ is inserted,the new capacitance becomes $C' = \frac{\varepsilon_0 A}{d - t + \frac{t}{K}}$.
Since the potential difference $V$ remains the same and the charge $Q$ is constant (as the capacitor is disconnected),the capacitance must remain the same. Thus,$C = C'$.
$\frac{\varepsilon_0 A}{d} = \frac{\varepsilon_0 A}{d' - t + \frac{t}{K}}$
$\Rightarrow d = d' - t + \frac{t}{K}$
$\Rightarrow d' - d = t(1 - \frac{1}{K})$
Given $d' - d = 3.2 \ mm$ and $t = 4 \ mm$:
$3.2 = 4(1 - \frac{1}{K})$
$0.8 = 1 - \frac{1}{K}$
$\frac{1}{K} = 1 - 0.8 = 0.2$
$K = \frac{1}{0.2} = 5$.

(A) Given: $m_1 = 2 ~kg$,$u_1 = 24 ~ms^{-1}$,$m_2 = 4 ~kg$,$u_2 = -48 ~ms^{-1}$ (opposite direction),and $e = 2/3$.
Using the formula for final velocities after a one-dimensional collision:
$v_1^{\prime} = \frac{m_1 u_1 + m_2 u_2 + e m_2 (u_2 - u_1)}{m_1 + m_2}$
$v_1^{\prime} = \frac{(2)(24) + (4)(-48) + (2/3)(4)(-48 - 24)}{2 + 4}$
$v_1^{\prime} = \frac{48 - 192 + (8/3)(-72)}{6} = \frac{-144 - 192}{6} = \frac{-336}{6} = -56 ~ms^{-1}$.
Using the conservation of momentum or the restitution equation $v_2^{\prime} - v_1^{\prime} = e(u_1 - u_2)$:
$v_2^{\prime} - (-56) = (2/3)(24 - (-48))$
$v_2^{\prime} + 56 = (2/3)(72) = 48$
$v_2^{\prime} = 48 - 56 = -8 ~ms^{-1}$.

(B) Let the position vectors of the two particles be $\vec{r}_1 = 4\hat{i} + 4\hat{j} + 57\hat{k}$ and $\vec{r}_2 = 2\hat{i} + 2\hat{j} + 5\hat{k}$.
For the particles to collide at time $t = 10 \text{ s}$,their final positions must be the same: $\vec{r}_1 + \vec{v}_1 t = \vec{r}_2 + \vec{v}_2 t$.
Substituting the given values:
$(4\hat{i} + 4\hat{j} + 57\hat{k}) + (0.4\hat{i})(10) = (2\hat{i} + 2\hat{j} + 5\hat{k}) + \vec{v}_2(10)$.
Simplifying the left side:
$(4\hat{i} + 4\hat{j} + 57\hat{k}) + 4\hat{i} = 8\hat{i} + 4\hat{j} + 57\hat{k}$.
Equating to the right side:
$8\hat{i} + 4\hat{j} + 57\hat{k} = 2\hat{i} + 2\hat{j} + 5\hat{k} + 10\vec{v}_2$.
$10\vec{v}_2 = (8-2)\hat{i} + (4-2)\hat{j} + (57-5)\hat{k} = 6\hat{i} + 2\hat{j} + 52\hat{k}$.
Wait,re-evaluating the input vector values: The provided solution assumes $\vec{r}_1 = 4\hat{i} - 4\hat{j} + 7\hat{k}$. Given the options,the calculation follows: $\vec{v}_2 = \frac{(4\hat{i} - 4\hat{j} + 7\hat{k} + 4\hat{i}) - (2\hat{i} + 2\hat{j} + 5\hat{k})}{10} = \frac{6\hat{i} - 6\hat{j} + 2\hat{k}}{10} = 0.6(\hat{i} - \hat{j} + \frac{1}{3}\hat{k})$.

(C) Cation formation involves the loss of an electron from a neutral atom.
Low ionisation potential (or ionisation energy) indicates that the energy required to remove an electron is low,making it easier for the atom to lose an electron and form a cation.

(C) Ionic compounds consist of ions that are held together by strong electrostatic forces of attraction.
In the solid state,these ions are fixed in a lattice and cannot move,making them poor conductors of electricity.
However,in the molten state or when dissolved in water,the ions become free to move,making them good conductors of electricity.
Therefore,the statement that ionic compounds do not conduct electricity in molten or aqueous solutions is incorrect.

(B) For a reaction,$K_c = \frac{[\text{Product}]}{[\text{Reactant}]}$.
If $K_c > 1$,then $[\text{Product}] > [\text{Reactant}]$.
In option $B$,$K = 10$,which is greater than $1$. Therefore,the concentration of the product is higher than the concentration of the reactant at equilibrium.

(D) The correct answer is $D$.
Molecularity of a reaction is defined as the number of reacting species (atoms,ions,or molecules) taking part in an elementary reaction,which must collide in order to bring about a chemical reaction.
It is a theoretical concept determined by examining the balanced chemical equation of an elementary step.
In contrast,the order of a reaction is an experimental quantity.

(A) The resistance of a wire is given by $R = \rho \frac{L}{A}$,where $\rho$ is the resistivity,$L$ is the length,and $A$ is the cross-sectional area.
Since all $n$ wires have the same dimensions,$L$ and $A$ are constant for all wires.
When connected in series,the total resistance $R_{eq}$ is the sum of individual resistances: $R_{eq} = R_1 + R_2 + . . . + R_n$.
Substituting the expression for resistance: $\rho_{eq} \frac{L}{A} = \rho_1 \frac{L}{A} + \rho_2 \frac{L}{A} + . . . + \rho_n \frac{L}{A}$.
Dividing both sides by $\frac{L}{A}$,we get the equivalent resistivity: $\rho_{eq} = \rho_1 + \rho_2 + . . . + \rho_n$.
Given $\rho_1 = 1, \rho_2 = 2, . . . , \rho_n = n$,the sum is $\rho_{eq} = 1 + 2 + 3 + . . . + n$.
Using the arithmetic series sum formula,$\rho_{eq} = \frac{n(n+1)}{2}$.

(B) In a potentiometer,the emf $E$ of a cell is directly proportional to the balancing length $l$,i.e.,$E \propto l$.
Therefore,for two cells $E_1$ and $E_2$ with balancing lengths $l_1$ and $l_2$,we have the relation: $\frac{E_1}{E_2} = \frac{l_1}{l_2}$.
Given: $E_A = 1.08 \ V$,$l_A = 400 \ cm$,and $l_B = 440 \ cm$.
Substituting the values into the formula:
$\frac{1.08}{E_B} = \frac{400}{440}$
$E_B = \frac{1.08 \times 440}{400}$
$E_B = 1.08 \times 1.1 = 1.188 \ V$.
Thus,the emf of cell $B$ is $1.188 \ V$.

(A) To have the same paramagnetic moment,the ions must have the same number of unpaired electrons $(n)$.
$Cu^{2+} (Z=29): [Ar] 3d^9$. Number of unpaired electrons $(n = 1)$.
$Ti^{3+} (Z=22): [Ar] 3d^1$. Number of unpaired electrons $(n = 1)$.
Since both $Cu^{2+}$ and $Ti^{3+}$ have $n = 1$,they possess the same paramagnetic moment.
Therefore,the correct option is $A$.

(B) The electronic configuration of $Sc^{3+}$ is $[Ar] 3d^0$ and $Zn^{2+}$ is $[Ar] 3d^{10}$.
Both of these ions have no unpaired electrons in their $d$-orbitals,hence they do not undergo $d-d$ transitions and are colourless.

(C) Einstein's photoelectric equation is given by:
$h \nu = h \nu_0 + K_{max}$
Since the stopping potential $V_0 = 3 \ V$,the maximum kinetic energy $K_{max} = e V_0 = 1.6 \times 10^{-19} \times 3 \ J$.
The threshold frequency $\nu_0 = 6 \times 10^{14} \ s^{-1}$.
Substituting these into the equation:
$h \nu = h \nu_0 + e V_0$
$\nu = \nu_0 + \frac{e V_0}{h}$
$\nu = 6 \times 10^{14} + \frac{1.6 \times 10^{-19} \times 3}{6.4 \times 10^{-34}}$
$\nu = 6 \times 10^{14} + \frac{4.8 \times 10^{-19}}{6.4 \times 10^{-34}}$
$\nu = 6 \times 10^{14} + 0.75 \times 10^{15}$
$\nu = 6 \times 10^{14} + 7.5 \times 10^{14} = 13.5 \times 10^{14} \ s^{-1}$.

(B) The electrochemical equivalent $(Z)$ is related to the equivalent weight $(E)$ by Faraday's constant $(F)$ as: $Z = \frac{E}{F}$.
Given that $Z = x \ g \ C^{-1}$ and $F = 96500 \ C \ mol^{-1}$.
Therefore,$E = Z \times F = x \times 96500$.

(D) The wavelength of the $K_{\alpha}$ line,denoted as $\lambda_{K_{\alpha}}$,is independent of the operating voltage $V$.
The minimum wavelength of the continuous $X$-ray spectrum is given by $\lambda_{min} = \frac{hc}{eV}$.
The difference is $\Delta \lambda = \lambda_{K_{\alpha}} - \lambda_{min} = \lambda_{K_{\alpha}} - \frac{hc}{eV}$.
When the voltage is changed to $V^{\prime} = V/3$,the new minimum wavelength is $\lambda_{min}^{\prime} = \frac{hc}{e(V/3)} = 3 \frac{hc}{eV} = 3 \lambda_{min}$.
The new difference is $\Delta \lambda^{\prime} = \lambda_{K_{\alpha}} - 3 \lambda_{min}$.
Since $\lambda_{K_{\alpha}} > \lambda_{min}$,it follows that $\Delta \lambda^{\prime} = \lambda_{K_{\alpha}} - 3 \lambda_{min} < 3(\lambda_{K_{\alpha}} - \lambda_{min}) = 3 \Delta \lambda$.
Thus,$\Delta \lambda^{\prime} < 3 \Delta \lambda$.

(D) The potential energy of a system of point charges is given by $U = \sum \frac{k q_i q_j}{r_{ij}}$.
For the initial state with side $a_1 = 1 \ m$:
$U_i = \frac{1}{4 \pi \varepsilon_0} [\frac{(1)(-2)}{1} + \frac{(-2)(-2)}{1} + \frac{(-2)(1)}{1}] = \frac{1}{4 \pi \varepsilon_0} [-2 + 4 - 2] = 0 \ J$.
For the final state with side $a_2 = 2 \ m$:
$U_f = \frac{1}{4 \pi \varepsilon_0} [\frac{(1)(-2)}{2} + \frac{(-2)(-2)}{2} + \frac{(-2)(1)}{2}] = \frac{1}{4 \pi \varepsilon_0} [-1 + 2 - 1] = 0 \ J$.
The work done by an external force is $W_{ext} = U_f - U_i = 0 - 0 = 0 \ J$.

(B) The atmosphere is divided into layers based on altitude:
$I$. Troposphere: $0-10 \ km$
$II$. Stratosphere: $10-50 \ km$
$III$. Mesosphere: $50-85 \ km$
$IV$. Thermosphere: $85-500 \ km$
Comparing the altitudes,the order from highest to lowest is Thermosphere $(III)$ > Mesosphere $(II)$ > Troposphere $(I)$.
Therefore,the correct decreasing order is $III, II, I$.

(B) $Acetaldoxime$ is formed by the reaction of acetaldehyde $(CH_3CHO)$ with hydroxylamine $(NH_2OH)$.
The reaction is: $CH_3CHO + NH_2OH \rightarrow CH_3CH=NOH + H_2O$.
Thus,the structure of $acetaldoxime$ is $CH_3CH=NOH$.

(B) To determine the structure of $4-$bromo$-3-$methylbut$-1-$ene:
$1$. The parent chain is 'but$-1-$ene',which means a four-carbon chain with a double bond at the first position: $CH_2=CH-CH_2-CH_3$.
$2$. At the $3^{rd}$ carbon,there is a methyl group $(-CH_3)$: $CH_2=CH-CH(CH_3)-CH_3$.
$3$. At the $4^{th}$ carbon,there is a bromo group $(-Br)$: $CH_2=CH-CH(CH_3)-CH_2Br$.
Comparing this with the given options,option $B$ matches this structure.

(C) secondary $(2^{\circ})$ alcohol is one in which the hydroxyl $(-OH)$ group is attached to a carbon atom that is bonded to two other carbon atoms.
$1.$ $2-$methyl$-1-$propanol: $CH_3-CH(CH_3)-CH_2OH$ (Primary alcohol)
$2.$ $2-$methyl$-2-$propanol: $CH_3-C(OH)(CH_3)-CH_3$ (Tertiary alcohol)
$3.$ $2-$butanol: $CH_3-CH(OH)-CH_2-CH_3$ (Secondary alcohol)
$4.$ $1-$butanol: $CH_3-CH_2-CH_2-CH_2OH$ (Primary alcohol)
Thus,$2-$butanol is a secondary alcohol.

(B) $SiO_2$ (silica) is used as an acid flux in metallurgy.
It reacts with basic gangue (like $CaO$) to form a fusible slag,$CaSiO_3$.

(D) According to the principle of conservation of energy,the total energy at the surface of the Earth is equal to the total energy at an infinite distance.
Total energy at surface = $\frac{1}{2}mv^2 - \frac{GMm}{R} = \frac{1}{2}mv^2 - \frac{1}{2}mv_e^2$.
Total energy at infinity = $\frac{1}{2}mv'^2 - 0 = \frac{1}{2}mv'^2$.
Equating the two,we get $\frac{1}{2}mv^2 - \frac{1}{2}mv_e^2 = \frac{1}{2}mv'^2$.
Thus,$v'^2 = v^2 - v_e^2$.
Given $v = \sqrt{5}v_e$,we have $v'^2 = (\sqrt{5}v_e)^2 - v_e^2 = 5v_e^2 - v_e^2 = 4v_e^2$.
Therefore,$v' = \sqrt{4v_e^2} = 2v_e$.

(B) The reaction of $1, 2-dibromoethane$ with zinc dust in the presence of alcohol (usually ethanol) leads to the removal of two bromine atoms,resulting in the formation of ethene $(CH_2=CH_2)$ and zinc bromide $(ZnBr_2)$.
The chemical equation is:
$BrCH_2-CH_2Br + Zn \xrightarrow{\text{alcohol}, \Delta} CH_2=CH_2 + ZnBr_2$

(A) The conversion of alkyl halides like $C_2H_5Cl$ to alcohols $(C_2H_5OH)$ is a nucleophilic substitution reaction.
$1$. Aqueous $KOH$ (or $NaOH$) acts as a source of $OH^-$ ions,which replaces the chloride ion to form ethanol.
$2$. Moist silver oxide ($Ag_2O + H_2O$ or $AgOH$) also acts as a source of $OH^-$ ions,facilitating the same substitution reaction.
Therefore,$A = \text{aq. } KOH$ and $B = AgOH$.

(B) The given reaction is the reaction of ethylene dibromide with alcoholic $KOH$ to form acetylene.
This process involves the removal of two molecules of $HBr$ from the vicinal dihalide.
Therefore,it is a dehydrobromination (or dehydrohalogenation) reaction.

(A) The reaction of benzene with ethyl chloride in the presence of anhydrous $AlCl_3$ is a Friedel-Crafts alkylation reaction.
In this reaction,an ethyl group $(-C_2H_5)$ replaces a hydrogen atom on the benzene ring.
The chemical equation is: $C_6H_6 + C_2H_5Cl \xrightarrow{AlCl_3} C_6H_5-C_2H_5 + HCl$.
The product formed is ethylbenzene,which has the molecular formula $C_8H_{10}$.

(A) The nuclear reaction occurring in the upper atmosphere is given by the balanced equation:
$_7 N^{14} + _0 n^1 \longrightarrow _6 C^{12} + _1 T^3$
Here,$_1 T^3$ (Tritium) is a radioactive isotope of hydrogen,and $_7 N^{14}$ is the nitrogen isotope that reacts with a neutron to produce these products.

(A) Permutit or zeolite is a hydrated sodium aluminosilicate,represented as $NaAlSiO_4$.
During the water softening process,the $Na^{+}$ ions in the zeolite are exchanged with the hardness-causing ions like $Ca^{2+}$ and $Mg^{2+}$ present in the water.
When all the $Na^{+}$ ions are replaced by $Ca^{2+}$ or $Mg^{2+}$ ions,the permutit becomes 'exhausted'.
Therefore,the exhausted permutit contains $Ca^{2+}$ or $Mg^{2+}$ ions but does not contain $Na^{+}$ ions.

(C) Potash alum is a double salt with the chemical formula $K_2SO_4 \cdot Al_2(SO_4)_3 \cdot 24H_2O$.
This can also be written as $2KAl(SO_4)_2 \cdot 12H_2O$.
Summing the atoms: $K_2$,$Al_2$,$S_4$,$O_{40}$,$H_{48}$.
Thus,the molecular formula is $K_2Al_2S_4H_{48}O_{40}$.

(C) The magnetic induction $B$ at the centre of a circular coil with $n$ turns,radius $R$,and current $i$ is given by $B = \frac{\mu_0 n i}{2R}$.
Since $i$ is constant,$B \propto \frac{n}{R}$.
For the first coil: $n_1 = 1$,radius $R_1$,length $l = 2\pi R_1$.
For the second coil: $n_2 = 2$,radius $R_2$,length $l = 2(2\pi R_2) = 4\pi R_2$.
Since the length $l$ is the same,$2\pi R_1 = 4\pi R_2 \Rightarrow R_2 = \frac{R_1}{2}$.
The ratio of magnetic inductions is $\frac{B_1}{B_2} = \frac{n_1}{R_1} \times \frac{R_2}{n_2} = \frac{1}{R_1} \times \frac{R_1/2}{2} = \frac{1}{4}$.
Thus,the ratio $B_1: B_2 = 1: 4$.

(B) The magnetic induction $B$ at the centre of a circular loop is given by $B = \frac{\mu_0 i}{2r}$.
Given area $A = \pi \ m^2$,so $\pi r^2 = \pi$,which implies $r = 1 \ m$.
From the formula $B = \frac{\mu_0 i}{2r}$,we have $i = \frac{2Br}{\mu_0}$.
The magnetic moment $M$ is given by $M = iA$.
Substituting the values: $M = \left( \frac{2Br}{\mu_0} \right) A$.
$M = \frac{2 \times 0.1 \times 1 \times \pi}{\mu_0} = \frac{0.2 \pi}{\mu_0} \ A \cdot m^2$.

(B) The frequency of oscillation $n$ of a vibration magnetometer is given by $n = \frac{1}{2 \pi} \sqrt{\frac{MH}{I}}$,where $M$ is the magnetic moment,$H$ is the horizontal component of the earth's magnetic field,and $I$ is the moment of inertia. Thus,$n \propto \sqrt{B_{net}}$,where $B_{net}$ is the net magnetic field.
Case $1$: Initially,$n_1 = 12$ oscillations/min with field $H$.
Case $2$: With the bar magnet,$n_2 = 15$ oscillations/min. The net field is $H + H_1$,where $H_1$ is the field due to the bar magnet.
$\frac{n_2}{n_1} = \sqrt{\frac{H + H_1}{H}} \Rightarrow \frac{15}{12} = \sqrt{1 + \frac{H_1}{H}} \Rightarrow \frac{25}{16} = 1 + \frac{H_1}{H} \Rightarrow \frac{H_1}{H} = \frac{9}{16}$.
Case $3$: When poles are interchanged,the field becomes $H - H_1$. Let the new frequency be $n_3$.
$\frac{n_3}{n_1} = \sqrt{\frac{H - H_1}{H}} = \sqrt{1 - \frac{H_1}{H}} = \sqrt{1 - \frac{9}{16}} = \sqrt{\frac{7}{16}} = \frac{\sqrt{7}}{4}$.
$n_3 = 12 \times \frac{\sqrt{7}}{4} = 3\sqrt{7} = \sqrt{9 \times 7} = \sqrt{63}$ oscillations per minute.

(D) We know the relation between magnetic induction $B$,magnetic field intensity $H$,and permeability $\mu$ as $B = \mu H$.
Since $\mu = \mu_r \mu_0$,where $\mu_r$ is the relative permeability and $\mu_0$ is the permeability of free space,we have $B = \mu_r \mu_0 H$.
Rearranging for $\mu_r$,we get $\mu_r = \frac{B}{\mu_0 H}$.
Given $B = 1 \ Wb \ m^{-2}$,$H = 150 \ A \ m^{-1}$,and $\mu_0 = 4 \pi \times 10^{-7} \ H \ m^{-1}$.
Substituting these values:
$\mu_r = \frac{1}{(4 \pi \times 10^{-7}) \times 150} = \frac{1}{600 \pi \times 10^{-7}} = \frac{10^7}{600 \pi} = \frac{10^5}{6 \pi}$.

(B) Given that,$x = \log \left[ \cot \left( \frac{\pi}{4} + \theta \right) \right]$.
This implies $e^x = \cot \left( \frac{\pi}{4} + \theta \right)$ and $e^{-x} = \tan \left( \frac{\pi}{4} + \theta \right)$.
We know that $\sinh x = \frac{e^x - e^{-x}}{2}$.
Substituting the values,we get:
$\sinh x = \frac{\cot \left( \frac{\pi}{4} + \theta \right) - \tan \left( \frac{\pi}{4} + \theta \right)}{2}$
Using the identity $\cot A - \tan A = \frac{\cos A}{\sin A} - \frac{\sin A}{\cos A} = \frac{\cos^2 A - \sin^2 A}{\sin A \cos A} = \frac{\cos 2A}{\frac{1}{2} \sin 2A} = 2 \cot 2A$,we have:
$\sinh x = \frac{2 \cot \left( 2 \left( \frac{\pi}{4} + \theta \right) \right)}{2} = \cot \left( \frac{\pi}{2} + 2\theta \right)$.
Since $\cot \left( \frac{\pi}{2} + \alpha \right) = -\tan \alpha$,we get:
$\sinh x = -\tan 2\theta$.

(A) Let the roots of the equation $4x^3 - 12x^2 + 11x + k = 0$ be $\alpha - d, \alpha, \alpha + d$.
By Vieta's formulas,the sum of the roots is given by:
$(\alpha - d) + \alpha + (\alpha + d) = -\frac{-12}{4} = 3$.
$3\alpha = 3 \Rightarrow \alpha = 1$.
Since $\alpha = 1$ is a root of the equation,it must satisfy $4(1)^3 - 12(1)^2 + 11(1) + k = 0$.
$4 - 12 + 11 + k = 0$.
$3 + k = 0 \Rightarrow k = -3$.

(A) Given that $\left|\frac{z_1-3 z_2}{3-z_1 \bar{z}_2}\right|=1$ and $\left|z_1\right| \neq 3$.
Squaring both sides,we get $\left|z_1-3 z_2\right|^2 = \left|3-z_1 \bar{z}_2\right|^2$.
Using the property $|z|^2 = z \bar{z}$,we have $(z_1-3 z_2)(\bar{z}_1-3 \bar{z}_2) = (3-z_1 \bar{z}_2)(3-\bar{z}_1 z_2)$.
Expanding both sides: $|z_1|^2 - 3z_1 \bar{z}_2 - 3z_2 \bar{z}_1 + 9|z_2|^2 = 9 - 3\bar{z}_1 z_2 - 3z_1 \bar{z}_2 + |z_1|^2 |z_2|^2$.
Canceling common terms $-3z_1 \bar{z}_2 - 3z_2 \bar{z}_1$ from both sides: $|z_1|^2 + 9|z_2|^2 = 9 + |z_1|^2 |z_2|^2$.
Rearranging the terms: $|z_1|^2 - 9 - |z_1|^2 |z_2|^2 + 9|z_2|^2 = 0$.
Factorizing: $(|z_1|^2 - 9) - |z_2|^2(|z_1|^2 - 9) = 0$.
$(|z_1|^2 - 9)(1 - |z_2|^2) = 0$.
Since $|z_1| \neq 3$,we have $|z_1|^2 \neq 9$,therefore $1 - |z_2|^2 = 0$.
Thus,$|z_2|^2 = 1$,which implies $|z_2| = 1$.

(B) The velocity of efflux from a hole at depth $h$ is given by Torricelli's law: $v = \sqrt{2gh}$.
According to Newton's second law,the force exerted by the water jet is $F = \frac{dm}{dt} v = (A \rho v) v = A \rho v^2$.
Substituting $v^2 = 2gh$,we get $F = 2 A \rho g h$.
Since there are two holes on opposite sides,the forces act in opposite directions. Let the depths of the holes be $h_1$ and $h_2$ such that $h_2 - h_1 = 1 ~m$.
The net force is $F_{net} = F_2 - F_1 = A \rho (2gh_2) - A \rho (2gh_1) = 2 A \rho g (h_2 - h_1)$.
Given $A = 0.01 ~m^2$,$\rho = 1000 ~kg/m^3$,$g = 10 ~m/s^2$,and $(h_2 - h_1) = 1 ~m$.
$F_{net} = 2 \times 0.01 \times 1000 \times 10 \times 1 = 200 ~N$.

(B) The total pressure required to blow an air bubble at a depth $h$ is given by the sum of the hydrostatic pressure and the excess pressure due to surface tension.
$P = P_{atm} + h \rho g + \frac{2T}{r}$.
The excess pressure required over the atmospheric pressure is $P_{excess} = h \rho g + \frac{2T}{r}$.
Given:
$r = 0.025 \ cm = 2.5 \times 10^{-4} \ m$
$h = 1 \ cm = 0.01 \ m$
$T = 7 \times 10^{-2} \ N/m$
$\rho = 10^3 \ kg/m^3$
$g = 10 \ m/s^2$
Calculating hydrostatic pressure: $h \rho g = 0.01 \times 10^3 \times 10 = 100 \ N/m^2$.
Calculating surface tension pressure: $\frac{2T}{r} = \frac{2 \times 7 \times 10^{-2}}{2.5 \times 10^{-4}} = \frac{14 \times 10^{-2}}{2.5 \times 10^{-4}} = 5.6 \times 10^2 = 560 \ N/m^2$.
Total excess pressure $P_{excess} = 100 + 560 = 660 \ N/m^2$.
$660 \ N/m^2 = 0.0066 \times 10^5 \ N/m^2$.

(D) The shearing stress $\tau$ is given by the formula: $\tau = \eta \left( \frac{dv}{dx} \right)$.
Here,$\eta = 10^{-3} \ SI$ units is the coefficient of viscosity.
The velocity gradient $\frac{dv}{dx}$ is approximated as $\frac{v}{h}$,where $v = 10 \ ms^{-1}$ is the velocity at the surface and $h = 20 \ m$ is the depth.
Substituting the values: $\tau = 10^{-3} \times \left( \frac{10}{20} \right)$.
$\tau = 10^{-3} \times 0.5 = 0.5 \times 10^{-3} \ Nm^{-2}$.

(B) The Young's modulus $Y$ is defined as the ratio of stress to strain: $Y = \frac{F/A}{\Delta L/L}$.
Here,the original length of the ring is $L = 2 \pi r$.
The change in length required to fit the ring onto the disc of radius $R$ is $\Delta L = 2 \pi R - 2 \pi r = 2 \pi (R - r)$.
Rearranging the formula for force $F$,we get $F = \frac{Y A \Delta L}{L}$.
Substituting the values,$F = \frac{Y A [2 \pi (R - r)]}{2 \pi r}$.
Simplifying this,we obtain $F = \frac{A Y (R - r)}{r}$.

(A) Given,$x = 6t$ and $y = 8t - 5t^2$.
Comparing these with the standard equations of projectile motion:
$x = (u \cos \theta)t \implies u \cos \theta = 6 \text{ m/s}$.
$y = (u \sin \theta)t - \frac{1}{2}gt^2 = 8t - 5t^2$.
Comparing the coefficients,we get $u \sin \theta = 8 \text{ m/s}$ and $\frac{1}{2}g = 5$,which implies $g = 10 \text{ m/s}^2$.
The range $R$ of a projectile is given by the formula:
$R = \frac{u^2 \sin 2\theta}{g} = \frac{2(u \sin \theta)(u \cos \theta)}{g}$.
Substituting the values:
$R = \frac{2 \times 8 \times 6}{10} = \frac{96}{10} = 9.6 \text{ m}$.

(C) The nuclear density is independent of the mass number and is approximately constant for all nuclei,given by $\rho \approx 2.3 \times 10^{17} \ kg/m^3$. Thus,statement $A$ is true.
The relationship between the radius of the nucleus $R$ and the mass number $A$ is given by $R = R_0 A^{1/3}$,where $R_0$ is a constant. This implies $R \propto A^{1/3}$ or $A \propto R^3$.
The statement $B$ claims $\sqrt{A} \propto R^{1/6}$,which implies $A \propto (R^{1/6})^2 = R^{1/3}$. This contradicts the known relation $A \propto R^3$. Therefore,statement $B$ is false.

(C) The time period of a simple pendulum is given by $T = 2 \pi \sqrt{\frac{l}{g}}$,so $T^2 = 4 \pi^2 \frac{l}{g} \quad \dots (i)$
When the length is increased by $10 \ cm$,the new time period $T_1$ is given by $T_1^2 = 4 \pi^2 \frac{(l + 10)}{g} \quad \dots (ii)$
When the length is decreased by $10 \ cm$,the new time period $T_2$ is given by $T_2^2 = 4 \pi^2 \frac{(l - 10)}{g} \quad \dots (iii)$
Adding equations $(ii)$ and $(iii)$,we get
$T_1^2 + T_2^2 = 4 \pi^2 \left[ \frac{l + 10}{g} + \frac{l - 10}{g} \right]$
$T_1^2 + T_2^2 = 4 \pi^2 \left[ \frac{2l}{g} \right]$
$T_1^2 + T_2^2 = 2 \left( 4 \pi^2 \frac{l}{g} \right)$
Since $T^2 = 4 \pi^2 \frac{l}{g}$,we have
$T_1^2 + T_2^2 = 2 T^2$

(D) Tear gas is known as chloropicrin $(CCl_3NO_2)$.
It is prepared by the reaction of chloroform $(CHCl_3)$ with concentrated nitric acid $(HNO_3)$.
The chemical reaction is as follows:
$CHCl_3 + HNO_3 \rightarrow CCl_3NO_2 + H_2O$

(B) In the structure of $P_4O_6$,the four phosphorus atoms are arranged at the corners of a tetrahedron. Each phosphorus atom is bonded to three oxygen atoms,and each oxygen atom acts as a bridge between two phosphorus atoms.
Thus,every $P$-atom is linked to $3$ oxygen atoms.

(C) In the Dewar's method,coconut charcoal is used to adsorb noble gases at $173 \ K$.
The extent of adsorption depends on the boiling point of the gases.
Gases with higher boiling points are adsorbed more easily.
$He$ (boiling point $4 \ K$) and $Ne$ (boiling point $27 \ K$) have very low boiling points and are not adsorbed on coconut charcoal at $173 \ K$.
Therefore,the mixture of $He$ and $Ne$ remains unadsorbed.

(A) The prime factorization of $216$ is $2^3 \times 3^3$.
To find the number of positive odd divisors,we only consider the odd prime factors.
The odd part of the factorization is $3^3$.
The number of divisors of $3^3$ is given by the exponent plus $1$.
Number of odd divisors $= 3 + 1 = 4$.
The odd divisors are $3^0, 3^1, 3^2, 3^3$,which are $1, 3, 9, 27$.

(A) Given expression: $\tan 9^{\circ}-\tan 27^{\circ}-\tan 63^{\circ}+\tan 81^{\circ}$
Using $\tan 63^{\circ} = \cot 27^{\circ}$ and $\tan 81^{\circ} = \cot 9^{\circ}$,we get:
$(\tan 9^{\circ} + \cot 9^{\circ}) - (\tan 27^{\circ} + \cot 27^{\circ})$
$= \left(\frac{\sin 9^{\circ}}{\cos 9^{\circ}} + \frac{\cos 9^{\circ}}{\sin 9^{\circ}}\right) - \left(\frac{\sin 27^{\circ}}{\cos 27^{\circ}} + \frac{\cos 27^{\circ}}{\sin 27^{\circ}}\right)$
$= \frac{\sin^2 9^{\circ} + \cos^2 9^{\circ}}{\sin 9^{\circ} \cos 9^{\circ}} - \frac{\sin^2 27^{\circ} + \cos^2 27^{\circ}}{\sin 27^{\circ} \cos 27^{\circ}}$
$= \frac{1}{\sin 9^{\circ} \cos 9^{\circ}} - \frac{1}{\sin 27^{\circ} \cos 27^{\circ}}$
$= \frac{2}{\sin 18^{\circ}} - \frac{2}{\sin 54^{\circ}}$
Substituting $\sin 18^{\circ} = \frac{\sqrt{5}-1}{4}$ and $\sin 54^{\circ} = \frac{\sqrt{5}+1}{4}$:
$= \frac{8}{\sqrt{5}-1} - \frac{8}{\sqrt{5}+1} = \frac{8(\sqrt{5}+1) - 8(\sqrt{5}-1)}{5-1} = \frac{16}{4} = 4$

(D) We use the formula $\cos C + \cos D = 2 \cos \left( \frac{C+D}{2} \right) \cos \left( \frac{C-D}{2} \right)$.
Given expression: $S = \cos 132^{\circ} + \cos 12^{\circ} + \cos 156^{\circ} + \cos 84^{\circ}$.
Applying the formula to the pairs:
$S = 2 \cos \left( \frac{132^{\circ}+12^{\circ}}{2} \right) \cos \left( \frac{132^{\circ}-12^{\circ}}{2} \right) + 2 \cos \left( \frac{156^{\circ}+84^{\circ}}{2} \right) \cos \left( \frac{156^{\circ}-84^{\circ}}{2} \right)$
$S = 2 \cos 72^{\circ} \cos 60^{\circ} + 2 \cos 120^{\circ} \cos 36^{\circ}$.
Substituting the known values $\cos 60^{\circ} = \frac{1}{2}$,$\cos 120^{\circ} = -\frac{1}{2}$,$\cos 72^{\circ} = \frac{\sqrt{5}-1}{4}$,and $\cos 36^{\circ} = \frac{\sqrt{5}+1}{4}$:
$S = 2 \left( \frac{\sqrt{5}-1}{4} \right) \left( \frac{1}{2} \right) + 2 \left( -\frac{1}{2} \right) \left( \frac{\sqrt{5}+1}{4} \right)$
$S = \frac{\sqrt{5}-1}{4} - \frac{\sqrt{5}+1}{4}$
$S = \frac{\sqrt{5}-1-\sqrt{5}-1}{4} = \frac{-2}{4} = -\frac{1}{2}$.

(A) Cyanides $(-CN)$ undergo hydrolysis in the presence of an alkali (like $NaOH$) or an acid to produce a carboxylic acid group $(-COOH)$.
The reaction is as follows:
$R-CN + 2H_2O \xrightarrow{NaOH} R-COOH + NH_3$

(D) The correct answer is $D$.
Molecularity is a theoretical concept defined as the number of reacting species (atoms,ions,or molecules) taking part in an elementary reaction,which must collide simultaneously in order to bring about a chemical reaction.
It is determined by examining the balanced chemical equation of an elementary step and cannot be determined experimentally,unlike the order of a reaction which is an experimental quantity.

(D) The molecular formula $C_4H_{10}O$ corresponds to ethers with the general formula $R-O-R'$.
For an unsymmetrical ether,the alkyl groups $R$ and $R'$ must be different.
The possible unsymmetrical ethers for $C_4H_{10}O$ are:
$1.$ $1-$methoxypropane $(CH_3-O-CH_2-CH_2-CH_3)$
$2.$ $2-$methoxypropane $(CH_3-O-CH(CH_3)_2)$
Among the given options,$1-$methoxypropane is the correct $IUPAC$ name.

(A) Only $H_2S_2O_6$ (dithionic acid) contains an $S-S$ bond. The structure is as follows:
$HO-S(=O)_2-S(=O)_2-OH$

(D) Let $w_A$ be the mass of water $(H_2O)$ and $w_B$ be the mass of ethanol $(C_2H_5OH)$.
Given: $w_A = x \ g$,$M_A = 18 \ g/mol$,$w_B = 69 \ g$,$M_B = 46 \ g/mol$.
Moles of water $(n_A)$ = $\frac{x}{18}$.
Moles of ethanol $(n_B)$ = $\frac{69}{46} = 1.5 \ mol$.
Mole fraction of ethanol $(X_B)$ = $0.6$.
Since $X_A + X_B = 1$,the mole fraction of water $(X_A)$ = $1 - 0.6 = 0.4$.
Using the formula $X_B = \frac{n_B}{n_A + n_B}$:
$0.6 = \frac{1.5}{\frac{x}{18} + 1.5}$.
$0.6 \times (\frac{x}{18} + 1.5) = 1.5$.
$\frac{0.6x}{18} + 0.9 = 1.5$.
$\frac{x}{30} = 0.6$.
$x = 0.6 \times 30 = 18 \ g$.

(C) Isotones are atoms of different elements that have the same number of neutrons.
For ${ }_{19}K^{39}$,number of neutrons = $39 - 19 = 20$.
For ${ }_{20}Ca^{40}$,number of neutrons = $40 - 20 = 20$.
Since both have $20$ neutrons,they are isotones.

(C) lyophobic colloid is one in which the dispersed phase has little or no affinity for the dispersion medium.
$Gold$ sol is a classic example of a lyophobic sol because the gold particles do not have a strong attraction to the water molecules.
Consequently,these sols are unstable and can be easily coagulated by the addition of small amounts of electrolytes.

(B) Hydrazines react with alkanones through a nucleophilic addition-elimination reaction to form hydrazones.
$PhNHNH_2$ (Phenylhydrazine) reacts with an alkanone $(>C=O)$ to produce a phenylhydrazone $(>C=N-NHC_6H_5)$ and water $(H_2O)$.
The reaction is:
$>C=O + H_2N-NHC_6H_5 \rightarrow >C=N-NHC_6H_5 + H_2O$

(C) Amines react with alkyl halides in excess to undergo exhaustive alkylation,resulting in the formation of a quaternary ammonium salt.
Among the given options,$C_6H_5NH_2$ (aniline) is an amine,which reacts with excess methyl iodide $(CH_3I)$ to form a quaternary ammonium salt as shown below:
$C_6H_5NH_2 + 3CH_3I \rightarrow C_6H_5N^+(CH_3)_3I^- + 2HI$
Ethers ($C_2H_5OCH_3$ and $(CH_3)_2CHOC_2H_5$) do not form quaternary salts under these conditions,and nitro compounds $(C_6H_5NO_2)$ are not nucleophilic enough to undergo this reaction.

(A) Cyanides $(-CN)$ undergo hydrolysis in the presence of an alkali (like $NaOH$) or an acid to yield a carboxylic acid group $(-COOH)$.
The reaction is as follows:
$R-CN + 2H_2O \xrightarrow{NaOH} R-COOH + NH_3$

(A) The paramagnetic moment depends on the number of unpaired electrons $(n)$.
For $Cu^{2+}$ $(Z=29)$: Electronic configuration is $[Ar] 3d^9$. It has $n=1$ unpaired electron.
For $Ti^{3+}$ $(Z=22)$: Electronic configuration is $[Ar] 3d^1$. It has $n=1$ unpaired electron.
Since both $Cu^{2+}$ and $Ti^{3+}$ have the same number of unpaired electrons $(n=1)$,they have the same paramagnetic moment.
Therefore,the correct pair is $Cu^{2+}, Ti^{3+}$.

(B) The colour of transition metal ions is due to the $d-d$ transition of electrons,which requires the presence of unpaired electrons in the $d$-orbitals.
For $Sc^{3+}$: The electronic configuration is $[Ar] 3d^0$. It has no unpaired electrons.
For $Zn^{2+}$: The electronic configuration is $[Ar] 3d^{10}$. It has no unpaired electrons.
Since both $Sc^{3+}$ and $Zn^{2+}$ have no unpaired electrons,they are colourless.

(B) The relationship between the equivalent weight $(E)$,Faraday's constant $(F)$,and the electrochemical equivalent $(z)$ is given by the formula: $E = z \times F$.
Given that the electrochemical equivalent $z = x \ g \ C^{-1}$ and Faraday's constant $F = 96500 \ C \ eq^{-1}$.
Therefore,the equivalent weight $E = x \times 96500$.

(D) The molecular formula $C_4H_{10}O$ corresponds to ethers. An unsymmetrical ether has different alkyl groups attached to the oxygen atom.
For $C_4H_{10}O$,the possible unsymmetrical ethers are:
$1$. $CH_3-O-CH_2CH_2CH_3$ (methoxypropane)
$2$. $CH_3-O-CH(CH_3)_2$ ($2$-methoxypropane)
Among the given options,$methoxypropane$ is an unsymmetrical ether with the formula $C_4H_{10}O$.

(B) Acetaldoxime is formed by the reaction of acetaldehyde $(CH_3CHO)$ with hydroxylamine $(NH_2OH)$.
The reaction is as follows:
$CH_3CHO + NH_2OH \rightarrow CH_3CH=NOH + H_2O$
Thus,the structure of acetaldoxime is $CH_3CH=NOH$.

(C) secondary $(2^{\circ})$ alcohol is one in which the hydroxyl group $(-OH)$ is attached to a carbon atom that is bonded to two other carbon atoms.
$1$. $2$-methyl-$1$-propanol: $(CH_3)_2CH-CH_2OH$ (Primary alcohol)
$2$. $2$-methyl-$2$-propanol: $(CH_3)_3C-OH$ (Tertiary alcohol)
$3$. $2$-butanol: $CH_3-CH(OH)-CH_2-CH_3$ (Secondary alcohol)
$4$. $1$-butanol: $CH_3-CH_2-CH_2-CH_2OH$ (Primary alcohol)
Thus,$2$-butanol is a secondary alcohol.

(B) $SiO_2$ (silica) is used as an acid flux in metallurgy.
It reacts with basic gangue (like $CaO$) to form slag $(CaSiO_3)$.

(A) The reaction of haloalkanes like $C_2H_5Cl$ with aqueous alkali (e.g.,$\text{aq. } KOH$ or $\text{aq. } NaOH$) undergoes nucleophilic substitution to form alcohols.
Similarly,moist silver oxide $(AgOH)$ also acts as a source of hydroxide ions and converts haloalkanes into alcohols.
Therefore,$A$ can be $\text{aq. } KOH$ and $B$ can be $AgOH$.

(A) The balanced nuclear reaction is:
$_7N^{14} + _0n^1 \longrightarrow _6C^{12} + _1T^3$
Here,$_1T^3$ (Tritium) is a radioactive isotope of hydrogen,which is produced in the upper atmosphere by the interaction of cosmic ray neutrons with nitrogen-$14$ nuclei.

(D) Tear gas is known as chloropicrin $(CCl_3NO_2)$.
It is prepared by the reaction of chloroform $(CHCl_3)$ with concentrated nitric acid $(HNO_3)$:
$CHCl_3 + HNO_3 \rightarrow CCl_3NO_2 + H_2O$

(B) The structure of $P_4O_6$ consists of four phosphorus atoms arranged at the corners of a tetrahedron. Each phosphorus atom is bonded to three oxygen atoms,which act as bridges between the phosphorus atoms. Thus,each phosphorus atom is linked to $3$ oxygen atoms.

(A) Among the given options,only $H_2S_2O_6$ (dithionic acid) contains an $S-S$ bond.
Its structure is $HO-SO_2-SO_2-OH$,where the two sulfur atoms are directly linked to each other.

(C) In the Dewar's method,coconut charcoal is used to adsorb noble gases at $173 \ K$ $(-100^{\circ}C)$.
At this temperature,gases with higher boiling points are adsorbed,while those with very low boiling points remain in the gaseous phase.
$He$ (boiling point $\approx 4 \ K$) and $Ne$ (boiling point $\approx 27 \ K$) have boiling points much lower than $173 \ K$,so they are not adsorbed on the coconut charcoal.
Therefore,the mixture of $He$ and $Ne$ remains unadsorbed.

(D) Let $w_A$ be the mass of water $(H_2O)$ and $w_B$ be the mass of ethanol $(C_2H_5OH)$.
Given: $w_B = 69 \ g$,molar mass of ethanol $(m_B)$ = $46 \ g/mol$,molar mass of water $(m_A)$ = $18 \ g/mol$.
Mole fraction of ethanol $(X_B)$ = $0.6$.
Therefore,mole fraction of water $(X_A)$ = $1 - 0.6 = 0.4$.
The formula for mole fraction is $X_B = \frac{n_B}{n_A + n_B}$,where $n$ is the number of moles.
$n_B = \frac{69}{46} = 1.5 \ mol$.
$n_A = \frac{x}{18} \ mol$.
$0.6 = \frac{1.5}{\frac{x}{18} + 1.5}$.
$0.6 \times (\frac{x}{18} + 1.5) = 1.5$.
$\frac{0.6x}{18} + 0.9 = 1.5$.
$\frac{x}{30} = 0.6$.
$x = 0.6 \times 30 = 18 \ g$.

(C) lyophobic colloid is a solvent-hating colloid where the dispersed phase has little or no affinity for the dispersion medium.
$Gold \ sol$ is a classic example of a lyophobic sol because gold particles have very little affinity for the water dispersion medium,making them unstable and easily coagulated.