A circular hole of radius frac{R}{4} is made | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The moment of inertia of the complete disc about point $O$ is $I_{total} = \frac{M R^2}{2}$.The radius of the removed disc is $r = \frac{R}{4}$.Si

Vedclass · Accepted Answer

$\frac{237 M R^2}{512}$

Vedclass · Answer

(B) The moment of inertia of the complete disc about point $O$ is $I_{total} = \frac{M R^2}{2}$.The radius of the removed disc is $r = \frac{R}{4}$.Since the disc is uniform,the mass is proportional to the area $(M \propto R^2)$. Therefore,the mass of the removed disc is $m = M \left( \frac{r}{R} \right)^2 = M \left( \frac{R/4}{R} \right)^2 = \frac{M}{16}$.The moment of inertia of the removed disc about its own central axis passing through $O'$ is $I_{cm} = \frac{1}{2} m r^2 = \frac{1}{2} \left( \frac{M}{16} \right) \left( \frac{R}{4} \right)^2 = \frac{M R^2}{512}$.Using the parallel axis theorem,the moment of inertia of the removed disc about point $O$ is $I_{removed} = I_{cm} + m d^2$,where $d = \frac{3R}{4}$ is the distance between $O$ and $O'$.$I_{removed} = \frac{M R^2}{512} + \left( \frac{M}{16} \right) \left( \frac{3R}{4} \right)^2 = \frac{M R^2}{512} + \frac{9 M R^2}{256} = \frac{M R^2 + 18 M R^2}{512} = \frac{19 M R^2}{512}$.The moment of inertia of the remaining portion is $I_{remaining} = I_{total} - I_{removed} = \frac{M R^2}{2} - \frac{19 M R^2}{512} = \frac{256 M R^2 - 19 M R^2}{512} = \frac{237 M R^2}{512}$.

$A$ circular hole of radius $\frac{R}{4}$ is made in a thin uniform disc having mass $M$ and radius $R$,as shown in the figure. The moment of inertia of the remaining portion of the disc about an axis passing through the point $O$ and perpendicular to the plane of the disc is:

Similar Questions

$A$ uniform rectangular thin sheet $ABCD$ of mass $M$ has length $a$ and breadth $b$,as shown in the figure. If the shaded portion $HBGO$ is cut off,the coordinates of the centre of mass of the remaining portion will be

$A$ circular plate of diameter '$a$' is kept in contact with a square plate of side '$a$' as shown. The density of the material and the thickness are same everywhere. The centre of mass of the composite system will be ...........

$A$ circular disc of radius $R$ has a uniform thickness. $A$ circular hole of diameter equal to the radius of the disc has been cut out as shown. The distance of the centre of mass of the remaining disc from point $O$ is

$A$ circular disc of radius $R$ is cut from a thin metal plate. $A$ hole of radius $R/2$ is cut from this disc such that it touches the rim of the original disc. Find the distance of the center of mass of the remaining part from the center of the original disc.

Vedclass Test Series

Exam Paper Generator

Online Exam Module