Consider a circular disc of radius $20 \ cm$ with centre located at the origin. $A$ circular hole of radius $5 \ cm$ is cut from this disc in such a way that the edge of the hole touches the edge of the disc. The distance of the centre of mass of the residual or remaining disc from the origin will be (in $cm$)

From a uniform disk of radius $R$,a circular hole of radius $R/2$ is cut out. The centre of the hole is at $R/2$ from the centre of the original disc. Locate the centre of gravity of the resulting flat body.

From a uniform circular disc of radius $2 \,cm$ (its centre of mass is at $O$), a circular portion of radius $1 \,cm$ is removed such that the shift in centre of mass is maximum. The disc is now rotated by an angle $\theta$ about an axis perpendicular to its plane and passing through $O$. If the magnitude of displacement of the new centre of mass is $\frac{1}{\sqrt{3}} \,cm$, then the $\theta$ is (in $^{\circ}$)

$A$ solid cone is placed on a horizontal surface has height $h$,radius $R$ and apex angle $\theta$ as shown. If the gravitational potential energy of the cone does not change as the position of the cone is changed from figure $(A)$ to figure $(B)$,then,

$A$ uniform square plate is shown in the figure. Four identical small squares are removed from its corners. Where will the $C.M.$ (Center of Mass) be located after removing all four squares? Give the answer in terms of quadrants and axes.

$A$ circular plate of uniform thickness has a diameter of $56 \ cm$. $A$ circular part of diameter $42 \ cm$ is removed from one edge. What is the position of the centre of mass of the remaining part in $cm$?