A circular disc of radius R is cut from a thi | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Let the mass of the original full disc be $M$. Its center of mass is at the origin $(0, 0)$.The area of the original disc is $A = \pi R^2$. The ma

Vedclass · Accepted Answer

$(0, -R/6)$

Vedclass · Answer

(A) Let the mass of the original full disc be $M$. Its center of mass is at the origin $(0, 0)$.The area of the original disc is $A = \pi R^2$. The mass $M = \sigma \pi R^2$,where $\sigma$ is the surface mass density.The hole has radius $r = R/2$. Its area is $a = \pi (R/2)^2 = \pi R^2 / 4$. Its mass is $m = \sigma a = M/4$.The center of the hole is at $(0, R/2)$ because it touches the rim of the original disc.Treating the hole as a negative mass,the center of mass $(Y_{CM})$ of the remaining part is given by:$Y_{CM} = \frac{M(0) - m(R/2)}{M - m}$$Y_{CM} = \frac{0 - (M/4)(R/2)}{M - M/4} = \frac{-MR/8}{3M/4} = -\frac{MR}{8} 	imes \frac{4}{3M} = -R/6$.Since the system is symmetric about the $y$-axis,$X_{CM} = 0$.Thus,the center of mass of the remaining part is $(0, -R/6)$.

$A$ circular disc of radius $R$ is cut from a thin metal plate. $A$ hole of radius $R/2$ is cut from this disc such that it touches the rim of the original disc. Find the distance of the center of mass of the remaining part from the center of the original disc.

Similar Questions

$A$ square shaped hole of side $l = \frac{a}{2}$ is carved out at a distance $d = \frac{a}{2}$ from the centre $O$ of a uniform circular disk of radius $a$. If the distance of the centre of mass of the remaining portion from $O$ is $-\frac{a}{X}$,find the value of $X$ (to the nearest integer).

From a circle of radius $a,$ an isosceles right-angled triangle with the hypotenuse as the diameter of the circle is removed. The distance of the centre of gravity of the remaining portion from the centre of the circle is

$A$ uniform square plate is shown in the figure. Four identical small squares are removed from its corners. Where will the $C.M.$ (Center of Mass) be located after removing all four squares? Give the answer in terms of quadrants and axes.

$A$ uniform square plate of side $a$ has a circular hole of diameter $a/2$ cut out from it as shown in the figure. The center of the hole is at $a/4$ from the center of the square plate. The distance of the center of mass of the resulting plate from the center of the square is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module