Answer the following by appropriately matching the lists based on the information given in the paragraph.
In a thermodynamics process on an ideal monatomic gas,the infinitesimal heat absorbed by the gas is given by $T \Delta X$,where $T$ is the temperature of the system and $\Delta X$ is the infinitesimal change in a thermodynamic quantity $X$ of the system. For a mole of monatomic ideal gas,$X = \frac{3}{2} R \ln \left(\frac{T}{T_A}\right) + R \ln \left(\frac{V}{V_A}\right)$. Here,$R$ is the gas constant,$V$ is the volume of the gas,$T_A$ and $V_A$ are constants.
The $List-I$ below gives some quantities involved in a process and $List-II$ gives some possible values of these quantities.
List-$I$ List-$II$ $(I)$ Work done by the system in process $1 \rightarrow 2 \rightarrow 3$ $(P)$ $\frac{1}{3} R T_0 \ln 2$ $(II)$ Change in internal energy in process $1 \rightarrow 2 \rightarrow 3$ $(Q)$ $\frac{1}{3} R T_0$ $(III)$ Heat absorbed by the system in process $1 \rightarrow 2 \rightarrow 3$ $(R)$ $R T_0$ $(IV)$ Heat absorbed by the system in process $1 \rightarrow 2$ $(S)$ $\frac{4}{3} R T_0$ $(T)$ $\frac{1}{3} R T_0 (3 + \ln 2)$ $(U)$ $\frac{5}{6} R T_0$
If the process carried out on one mole of monatomic ideal gas is as shown in the figure in the $PV$-diagram with $P_0 V_0 = \frac{1}{3} R T_0$,the correct match is:
$(1)$ $I \rightarrow Q, II \rightarrow R, III \rightarrow P, IV \rightarrow U$
$(2)$ $I \rightarrow S, II \rightarrow R, III \rightarrow Q, IV \rightarrow T$
$(3)$ $I \rightarrow Q, II \rightarrow R, III \rightarrow S, IV \rightarrow U$
$(4)$ $I \rightarrow Q, II \rightarrow S, III \rightarrow R, IV \rightarrow U$
If the process on one mole of monatomic ideal gas is as shown in the $TV$-diagram with $P_0 V_0 = \frac{1}{3} R T_0$,the correct match is:
$(1)$ $I \rightarrow S, II \rightarrow T, III \rightarrow Q, IV \rightarrow U$
$(2)$ $I \rightarrow P, II \rightarrow R, III \rightarrow T, IV \rightarrow S$
$(3)$ $I \rightarrow P, II \rightarrow R, III \rightarrow Q, IV \rightarrow T$
$(4)$ $I \rightarrow P, II \rightarrow R, III \rightarrow T, IV \rightarrow P$
Give the answer for question $(1)$ and $(2)$.
In a thermodynamics process on an ideal monatomic gas,the infinitesimal heat absorbed by the gas is given by $T \Delta X$,where $T$ is the temperature of the system and $\Delta X$ is the infinitesimal change in a thermodynamic quantity $X$ of the system. For a mole of monatomic ideal gas,$X = \frac{3}{2} R \ln \left(\frac{T}{T_A}\right) + R \ln \left(\frac{V}{V_A}\right)$. Here,$R$ is the gas constant,$V$ is the volume of the gas,$T_A$ and $V_A$ are constants.
The $List-I$ below gives some quantities involved in a process and $List-II$ gives some possible values of these quantities.
| List-$I$ | List-$II$ |
| $(I)$ Work done by the system in process $1 \rightarrow 2 \rightarrow 3$ | $(P)$ $\frac{1}{3} R T_0 \ln 2$ |
| $(II)$ Change in internal energy in process $1 \rightarrow 2 \rightarrow 3$ | $(Q)$ $\frac{1}{3} R T_0$ |
| $(III)$ Heat absorbed by the system in process $1 \rightarrow 2 \rightarrow 3$ | $(R)$ $R T_0$ |
| $(IV)$ Heat absorbed by the system in process $1 \rightarrow 2$ | $(S)$ $\frac{4}{3} R T_0$ |
| $(T)$ $\frac{1}{3} R T_0 (3 + \ln 2)$ | |
| $(U)$ $\frac{5}{6} R T_0$ |
If the process carried out on one mole of monatomic ideal gas is as shown in the figure in the $PV$-diagram with $P_0 V_0 = \frac{1}{3} R T_0$,the correct match is:
$(1)$ $I \rightarrow Q, II \rightarrow R, III \rightarrow P, IV \rightarrow U$
$(2)$ $I \rightarrow S, II \rightarrow R, III \rightarrow Q, IV \rightarrow T$
$(3)$ $I \rightarrow Q, II \rightarrow R, III \rightarrow S, IV \rightarrow U$
$(4)$ $I \rightarrow Q, II \rightarrow S, III \rightarrow R, IV \rightarrow U$
If the process on one mole of monatomic ideal gas is as shown in the $TV$-diagram with $P_0 V_0 = \frac{1}{3} R T_0$,the correct match is:
$(1)$ $I \rightarrow S, II \rightarrow T, III \rightarrow Q, IV \rightarrow U$
$(2)$ $I \rightarrow P, II \rightarrow R, III \rightarrow T, IV \rightarrow S$
$(3)$ $I \rightarrow P, II \rightarrow R, III \rightarrow Q, IV \rightarrow T$
$(4)$ $I \rightarrow P, II \rightarrow R, III \rightarrow T, IV \rightarrow P$
Give the answer for question $(1)$ and $(2)$.
- A
- B
- C
- D
Explore More
Similar Questions
What are the limitations of the first law of thermodynamics?
Difficult
View SolutionInitial pressure and volume of a gas are $P$ and $V$ respectively. First,its volume is expanded to $4V$ by an isothermal process,and then its volume is reduced to $V$ by an adiabatic process. Find its final pressure if $\gamma = \frac{3}{2}$.
$A$ cycle followed by an engine (made of one mole of perfect gas in a cylinder with a piston) is shown in the figure.
$A$ to $B$: volume constant
$B$ to $C$: adiabatic
$C$ to $D$: volume constant
$D$ to $A$: adiabatic
$V_C = V_D = 2V_A = 2V_B$
$(a)$ In which part of the cycle is heat supplied to the engine from outside?
$(b)$ In which part of the cycle is heat given to the surrounding by the engine?
$(c)$ What is the work done by the engine in one cycle? Write your answer in terms of $P_A, P_B, V_A$.
$(d)$ What is the efficiency of the engine?
$(\gamma = 5/3, C_v = 3/2 R$ for one mole of the gas$)$
$A$ to $B$: volume constant
$B$ to $C$: adiabatic
$C$ to $D$: volume constant
$D$ to $A$: adiabatic
$V_C = V_D = 2V_A = 2V_B$
$(a)$ In which part of the cycle is heat supplied to the engine from outside?
$(b)$ In which part of the cycle is heat given to the surrounding by the engine?
$(c)$ What is the work done by the engine in one cycle? Write your answer in terms of $P_A, P_B, V_A$.
$(d)$ What is the efficiency of the engine?
$(\gamma = 5/3, C_v = 3/2 R$ for one mole of the gas$)$
Difficult
View SolutionHeat is supplied to a diatomic gas at constant pressure. Then the ratio of $\Delta Q : \Delta U : \Delta W$ is . . . . . . .
Consider one mole of helium gas enclosed in a container at initial pressure $P_1$ and volume $V_1$. It expands isothermally to volume $4 V_1$. After this,the gas expands adiabatically and its volume becomes $32 V_1$. The work done by the gas during isothermal and adiabatic expansion processes are $W_{\text{iso}}$ and $W_{\text{adia}}$,respectively. If the ratio $\frac{W_{\text{iso}}}{W_{\text{adia}}} = f \ln 2$,then $f$ is:
MediumIIT 2020
View SolutionVedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo