What is the Young's modulus and bulk modulus for a perfect rigid body?

Copper of fixed volume $V$ is drawn into a wire of length $l$. When this wire is subjected to a constant force $F$,the extension produced in the wire is $\Delta l$. Which of the following graphs is a straight line?

The two wires $A$ and $B$ of equal cross-section but of different materials are joined together. The ratio of Young's modulus of wire $A$ and wire $B$ is $20/11$. When the joined wire is kept under certain tension the elongations in the wires $A$ and $B$ are equal. If the length of wire $A$ is $2.2\text{ m}$,then the length of wire $B$ is . . . . . . m.

$A$ $500 \,g$ ball is attached to one end of an aluminum wire of area of cross-section $0.5 \,mm^2$ and an unstretched length of $1.4 \,m$. The other end of the wire is fixed to the top of a vertical pole. The ball rotates about the pole in a horizontal plane such that the angle between the wire and the horizontal is $30^{\circ}$. The increase in the length of the wire is . . . . . . $mm$. (Young's modulus of aluminum $= 0.7 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)

$A$ steel ring of radius $r$ and cross-sectional area $A$ is fitted onto a wooden disc of radius $R$ $(R > r)$. If Young's modulus is $Y$,then the force with which the steel ring is expanded is

Two wires of the same length and radius are joined end-to-end and loaded. The Young's moduli of the materials of the two wires are $Y_{1}$ and $Y_{2}$. If the combination behaves as a single wire,then its equivalent Young's modulus is: