The elastic limit of a metal is frac{400}{pi} | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The stress $\sigma$ is defined as the force $F$ divided by the cross-sectional area $A$. The elastic limit is the maximum stress the material can

Vedclass · Accepted Answer

$2.2$

Vedclass · Answer

(A) The stress $\sigma$ is defined as the force $F$ divided by the cross-sectional area $A$. The elastic limit is the maximum stress the material can withstand.Given: Elastic limit $\sigma = \frac{400}{\pi} 	ext{ MPa} = \frac{400}{\pi} 	imes 10^6 	ext{ Pa}$, Force $F = 484 	ext{ N}$.The area of the cross-section of a rod with diameter $d$ is $A = \pi \frac{d^2}{4}$.Using the formula $\sigma = \frac{F}{A}$, we have:$\frac{400}{\pi} 	imes 10^6 = \frac{484}{\pi \frac{d^2}{4}}$$\frac{400}{\pi} 	imes 10^6 = \frac{484 	imes 4}{\pi d^2}$Canceling $\pi$ from both sides:$400 	imes 10^6 = \frac{1936}{d^2}$$d^2 = \frac{1936}{400 	imes 10^6} = 4.84 	imes 10^{-6} 	ext{ m}^2$$d = \sqrt{4.84 	imes 10^{-6}} = 2.2 	imes 10^{-3} 	ext{ m} = 2.2 	ext{ mm}$.

The elastic limit of a metal is $\frac{400}{\pi} \text{ MPa}$. If a rod of this metal is to support a $484 \text{ N}$ load without exceeding its elastic limit, the minimum diameter of the rod is: (in $\text{ mm}$)

Similar Questions

If the length of a wire is doubled,what is the strain?

Write copper,steel,glass,and rubber in the order of increasing coefficient of elasticity.

The material which practically does not show elastic after effect is

The load versus elongation graphs for four wires of same length and made of the same material are shown in the figure. The thinnest wire is represented by the line

The two thigh bones (femurs),each of cross-sectional area $10 \, cm^2$,support the upper part of a person of mass $50 \, kg$. The average pressure sustained by the femurs is ............. $N/m^2$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module