The circular divisions of a screw gauge are $50$. It moves $0.5 \ mm$ on the main scale in one rotation. When the diameter of a wire is measured,the main scale reading is $3.5 \ mm$ and the circular scale reading is $32$. If the zero error (positive) in the screw gauge is $0.06 \ mm$,then the diameter of the wire is:

The vernier calliper used for measurement has a positive zero error of $0.3 \ mm$. While taking measurement for the internal diameter of a vessel,it was observed that the zero of the vernier scale lies between $9.5 \ cm$ and $9.6 \ cm$ of the main scale and the $6^{th}$ division of the vernier scale coincides with a main scale division. If the least count of the vernier calliper is $0.01 \ cm$,the correct value of the diameter will be: (in $cm$)

The vernier constant of Vernier callipers is $0.1 \,mm$ and it has zero error of $(-0.05) \,cm$. While measuring the diameter of a sphere,the main scale reading is $1.7 \,cm$ and the coinciding vernier division is $5$. The corrected diameter will be ........... $\times 10^{-2} \,cm$.

Given below are two statements:
Statement $I$: In a vernier callipers,one vernier scale division is always smaller than one main scale division.
Statement $II$: The vernier constant is given by one main scale division multiplied by the number of vernier scale division.
In the light of the above statements,choose the correct answer from the options given below.

The diameter of a spherical bob is measured using a vernier callipers. $9$ divisions of the main scale,in the vernier callipers,are equal to $10$ divisions of vernier scale. One main scale division is $1\, {mm}$. The main scale reading is $10\, {mm}$ and $8^{\text{th}}$ division of vernier scale was found to coincide exactly with one of the main scale division. If the given vernier callipers has positive zero error of $0.04\, {cm}$,then the radius of the bob is $...... \,\times 10^{-2} \,{cm}$.

The vernier scale used for measurement has a positive zero error of $0.2\, mm$. If while taking a measurement it was noted that the '$0$' on the vernier scale lies between $8.5\, cm$ and $8.6\, cm$ and the vernier coincidence is $6$,then the correct value of measurement is ............. $cm$. (Least count $= 0.01\, cm$)