Given below are two statements:
Statement $I$: In a vernier callipers,one vernier scale division is always smaller than one main scale division.
Statement $II$: The vernier constant is given by one main scale division multiplied by the number of vernier scale division.
In the light of the above statements,choose the correct answer from the options given below.

The one division of main scale of vernier callipers reads $1\,mm$ and $10$ divisions of Vernier scale is equal to the $9$ divisions on main scale. When the two jaws of the instrument touch each other the $zero$ of the Vernier lies to the right of $zero$ of the main scale and its fourth division coincides with a main scale division. When a spherical bob is tightly placed between the two jaws,the $zero$ of the Vernier scale lies in between $4.1\,cm$ and $4.2\,cm$ and $6^{\text{th}}$ Vernier division coincides with a main scale division. The diameter of the bob will be $.............10^{-2}\,cm$

$A$ Vernier calipers has $1 \,mm$ marks on the main scale. It has $20$ equal divisions on the Vernier scale which match with $16$ main scale divisions. For this Vernier calipers, the least count is (in $\,mm$)

In an experiment,the angles are required to be measured using an instrument where $29$ divisions of the main scale exactly coincide with $30$ divisions of the vernier scale. If the smallest division of the main scale is half a degree $(= 0.5^\circ)$,then the least count of the instrument is:

There are $100$ divisions on the circular scale of a screw gauge of pitch $1 \,mm$. With no measuring quantity in between the jaws,the zero of the circular scale lies $5$ divisions below the reference line. The diameter of a wire is then measured using this screw gauge. It is found that $4$ linear scale divisions are clearly visible while $60$ divisions on the circular scale coincide with the reference line. The diameter of the wire is: (in $\,mm$)

The internal and external radii of a hollow cylinder are measured with the help of a vernier callipers. Their values are $(4.23 \pm 0.01) \, cm$ and $(3.87 \pm 0.01) \, cm,$ respectively. The thickness of the wall of the cylinder is