One end of the steel rod is clamped to the ro | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Young's modulus $Y$ is defined as the ratio of longitudinal stress to longitudinal strain:$Y = \frac{F/A}{\Delta l/l} = \frac{Fl}{A \Delta l}$Rear

Vedclass · Accepted Answer

$0.025$

Vedclass · Answer

(A) Young's modulus $Y$ is defined as the ratio of longitudinal stress to longitudinal strain:$Y = \frac{F/A}{\Delta l/l} = \frac{Fl}{A \Delta l}$Rearranging for the change in length $\Delta l$:$\Delta l = \frac{Fl}{AY}$Given:Force $F = mg = 1000 \,kg 	imes 10 \,ms^{-2} = 10,000 \,N$Length $l = 50 \,cm = 0.5 \,m$Area $A = 1000 \,mm^2 = 1000 	imes 10^{-6} \,m^2 = 10^{-3} \,m^2$Young's modulus $Y = 2 	imes 10^{11} \,Nm^{-2}$Substituting the values:$\Delta l = \frac{10,000 	imes 0.5}{10^{-3} 	imes 2 	imes 10^{11}}$$\Delta l = \frac{5,000}{2 	imes 10^8} = 2,500 	imes 10^{-8} \,m = 2.5 	imes 10^{-5} \,m$Converting to millimeters:$\Delta l = 2.5 	imes 10^{-5} 	imes 10^3 \,mm = 0.025 \,mm$

Similar Questions

The Young's modulus of a wire of length $L$ and radius $r$ is $Y \ N/m^2$. If the length and radius are reduced to $L/2$ and $r/2,$ then its Young's modulus will be

$A$ copper wire of length $4.0 \, m$ and area of cross-section $1.2 \, cm^2$ is stretched with a force of $4.8 \times 10^3 \, N$. If Young's modulus for copper is $1.2 \times 10^{11} \, N/m^2$,the increase in the length of the wire will be:

$A$ uniform dense rod with non-uniform Young's modulus is hanging from the ceiling under gravity. If the elastic energy density at every point is the same,then how will Young's modulus change with $x$ as shown in the graphs?

Vedclass Test Series

Exam Paper Generator

Online Exam Module