$A$ resistance of $R \; \Omega$ draws current from a potentiometer. The potentiometer has a total resistance $R_{0} \; \Omega$ (Figure). $A$ voltage $V$ is supplied to the potentiometer. Derive an expression for the voltage across $R$ when the sliding contact is in the middle of the potentiometer.

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(N/A) When the sliding contact $B$ is in the middle of the potentiometer,the resistance $R_{0}$ is divided into two equal parts,each of $R_{0}/2$. The resistance $R$ is connected in parallel with the lower half of the potentiometer (between points $A$ and $B$).
The equivalent resistance $R_{1}$ between points $A$ and $B$ is given by:
$\frac{1}{R_{1}} = \frac{1}{R} + \frac{1}{R_{0}/2} = \frac{1}{R} + \frac{2}{R_{0}} = \frac{R_{0} + 2R}{R \cdot R_{0}}$
$R_{1} = \frac{R \cdot R_{0}}{R_{0} + 2R}$
The total resistance of the circuit between points $A$ and $C$ is the sum of the equivalent resistance $R_{1}$ and the remaining part of the potentiometer resistance $(R_{0}/2)$:
$R_{total} = R_{1} + \frac{R_{0}}{2}$
The total current $I$ flowing from the source $V$ is:
$I = \frac{V}{R_{total}} = \frac{V}{R_{1} + R_{0}/2} = \frac{2V}{2R_{1} + R_{0}}$
The voltage $V_{1}$ across the resistance $R$ is the same as the voltage across the parallel combination $R_{1}$:
$V_{1} = I \cdot R_{1} = \left( \frac{2V}{2R_{1} + R_{0}} \right) \cdot R_{1}$
Substituting $R_{1} = \frac{R \cdot R_{0}}{R_{0} + 2R}$ into the expression for $V_{1}$:
$V_{1} = \frac{2V \cdot \left( \frac{R \cdot R_{0}}{R_{0} + 2R} \right)}{2 \left( \frac{R \cdot R_{0}}{R_{0} + 2R} \right) + R_{0}} = \frac{2V \cdot R \cdot R_{0}}{2R \cdot R_{0} + R_{0}(R_{0} + 2R)} = \frac{2V \cdot R \cdot R_{0}}{2R \cdot R_{0} + R_{0}^{2} + 2R \cdot R_{0}} = \frac{2V \cdot R \cdot R_{0}}{R_{0}^{2} + 4R \cdot R_{0}}$
Dividing numerator and denominator by $R_{0}$:
$V_{1} = \frac{2VR}{R_{0} + 4R}$

Explore More

Similar Questions

In a potentiometer arrangement,a cell of $emf$ $1.25\,V$ gives a balance point at $35.0\,cm$ length of the wire. If the cell is replaced by another cell and the balance point shifts to $63.0\,cm,$ the $emf$ of the second cell is ............... $V$.

$A$ wire of length $100\, cm$ is connected to a cell of emf $2\, V$ and negligible internal resistance. The resistance of the wire is $3\, \Omega$. The additional resistance required to produce a potential difference of $1\, mV/cm$ is ............. $\Omega$.

If the length of a potentiometer wire is increased,then the length of the previously obtained balance point will

In the potentiometer experiment shown in the figure,for the position $X$ of the jockey $J$,there occurs a null deflection in the galvanometer. Then the potential difference between points $A$ and $X$ is ................ $V$.

For the measurement of potential difference,a potentiometer is preferred in comparison to a voltmeter because

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo