For the measurement of potential difference,a potentiometer is preferred in comparison to a voltmeter because

To measure the internal resistance of a battery,a potentiometer is used. For $R = 10 \ \Omega$,the balance point is observed at $\ell = 500 \ cm$ and for $R = 1 \ \Omega$,the balance point is observed at $\ell = 400 \ cm$. The internal resistance of the battery is approximately: (in $Omega$)

The adjoining figure shows the connections of a potentiometer experiment to determine the internal resistance of a Leclanché cell. When the cell is on open circuit,the balancing length of the potentiometer wire is $3.4 \, m$,and on closing the key $K_2$,the balancing length becomes $1.7 \, m$. If the resistance $R$ through which current is drawn is $10 \, \Omega$,then the internal resistance of the cell is .............. $\Omega$.

$AB$ is a potentiometer wire of length $100\, cm$ and its resistance is $10\,\Omega$. It is connected in series with a resistance $R = 40\,\Omega$ and a battery of $e.m.f.$ $2\,V$ and negligible internal resistance. If a source of unknown $e.m.f.$ $E$ is balanced by $40\, cm$ length of the potentiometer wire,the value of $E$ is ................. $V$. (in $,V$)

$A$ potentiometer has a uniform potential gradient. The specific resistance (resistivity) of the material of the potentiometer wire is $10^{-7} \, \Omega \cdot m$, the current passing through it is $0.1 \, A$, and the cross-sectional area of the wire is $10^{-6} \, m^2$. The potential gradient along the potentiometer wire is:

The length of a potentiometer wire is $4 \,m$ and is connected in series with an accumulator. The e.m.f. of a cell balances against $1.5 \,m$ length of the wire. If the length of the potentiometer wire is doubled,then the new balancing length of the wire will be: (in $\,m$)