$A$ generator at a utility company produces $100 \, A$ of current at $4000 \, V$. The voltage is stepped up to $240,000 \, V$ by a transformer before it is sent on a high voltage transmission line. The current in the transmission line is ....... $A$.

An $AC$ source of internal resistance $10^3 \Omega$ is connected to a transformer. The ratio of the number of turns in the primary to the number of turns in the secondary to match the source to a load resistance of $10 \Omega$ is

What is increased in a step-down transformer?

$A$ step-down transformer connected to an $AC$ mains supply of $220 \, V$ is made to operate a $11 \, V, 44 \, W$ lamp. Ignoring power losses in the transformer,what is the current in the primary circuit? (In $A$)

$A$ small town with a demand of $800 \; kW$ of electric power at $220 \; V$ is situated $15 \; km$ away from an electric plant generating power at $440 \; V$. The resistance of the two-wire line carrying power is $0.5 \; \Omega/km$. The town gets power from the line through a $40,000-220 \; V$ step-down transformer at a sub-station in the town.
$(a)$ Estimate the line power loss in the form of heat.
$(b)$ How much power must the plant supply,assuming there is negligible power loss due to leakage?
$(c)$ Characterise the step-up transformer at the plant.
(Neglect,as before,leakage losses). Hence,explain why high-voltage transmission is preferred?

Find the current through the primary coil $(P)$ of the transformer shown below. (in $A$)