$A$ coil is placed in $y-z$ plane making an angle of $30^{\circ}$ with the $x$-axis. The current through the coil is $I$,and the number of turns is $N$. If a magnetic field of strength $B$ is applied in the positive $x$-direction,find the torque experienced by the coil (Radius of the coil is $R$).
$(N=100, I=1 \text{ A}, R=2 \text{ m}, B=\frac{1}{\pi} \text{ T})$

$A$ circular coil of radius $4\, cm$ has $50$ turns. In this coil,a current of $2\, A$ is flowing. It is placed in a magnetic field of $0.1\, Wb/m^2$. The amount of work done in rotating it through $180^\circ$ from its equilibrium position will be ........ $J$.

Suppose we want to verify the analogy between electrostatic and magnetostatic by an explicit experiment. Consider the motion of
$(i)$ electric dipole $\vec{p}$ in an electrostatic field $\vec{E}$ and
$(ii)$ magnetic dipole $\vec{M}$ in a magnetic field $\vec{B}$. Write down a set of conditions on $\vec{E}, \vec{B}, \vec{p}, \vec{M}$ so that the two motions are verified to be identical. (Assume identical initial conditions.)

The figure below shows the north and south poles of a permanent magnet in which an $n$-turn coil of cross-sectional area $A$ is placed. When a current $i$ is passed through the coil,the plane of the coil makes an angle $\theta$ with respect to the direction of the magnetic field $B$. The torque on the coil is:

$A$ current-carrying loop is free to turn in a uniform magnetic field. The loop will come into equilibrium when its plane is inclined at

$A$ solenoid of length $0.4 \ m$ and having $500$ turns of wire carries a current $3 \ A$. $A$ thin coil having $10$ turns of wire and radius $0.1 \ m$ carries current $0.4 \ A$. The torque required to hold the coil in the middle of the solenoid with its axis perpendicular to the axis of the solenoid is $(\mu_0 = 4\pi \times 10^{-7} \ SI \ units, \pi^2 = 10, \sin 90^{\circ} = 1)$.