$A$ thick metal wire of density $\rho$ and length $L$ is hung from a rigid support. The increase in length of the wire due to its own weight is ($Y =$ Young's modulus of the material of the wire).

$A$ thin $1 \, m$ long rod has a radius of $5 \, mm$. $A$ force of $50 \, \pi \, kN$ is applied at one end to determine its Young's modulus. Assume that the force is exactly known. If the least count in the measurement of all lengths is $0.01 \, mm$,which of the following statements is false?

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be:

If the length of a wire is made double and the radius is halved of its respective values,then the Young's modulus of the material of the wire will:

The force required to stretch a wire of cross-section $1 \ cm^{2}$ to double its length will be ........ $\times 10^{7} \ N$. (Given Young's modulus of the wire $= 2 \times 10^{11} \ N/m^{2}$)

$A$ metal rod of cross-sectional area $3 \times 10^{-6} \,m^{2}$ is suspended vertically from one end and has a length of $0.4 \,m$ at $100^{\circ} C$. The rod is cooled to $0^{\circ} C$, but prevented from contracting by attaching a mass '$m$' at the lower end. Find the value of '$m$'. (Given: $Y = 10^{11} \,N/m^{2}$, coefficient of linear expansion $\alpha = 10^{-5} /K$, $g = 10 \,m/s^{2}$) (in $\,kg$)