$A$ black body radiates maximum energy at wavelength $\lambda$ and its emissive power is $E$. Now, due to a change in the temperature of that body, it radiates maximum energy at wavelength $\frac{2 \lambda}{3}$. At that temperature, the emissive power is:

Power radiated by a black body at temperature $T_1$ is $P$ and it radiates maximum energy at a wavelength $\lambda_1$. If the temperature of the black body is changed from $T_1$ to $T_2$,it radiates maximum energy at a wavelength $\frac{\lambda_1}{2}$. The power radiated at $T_2$ is (in $P$)

$A$ heated body emits radiation which has maximum intensity at frequency $f_m$. If the temperature of the body is doubled,then:

$A$ long metallic bar is carrying heat from one of its ends to the other end under steady-state. The variation of temperature $\theta$ along the length $x$ of the bar from its hot end is best described by which of the following figures?

The power radiated by a black body is $P$ and it radiates maximum energy around the wavelength $\lambda_0$. If the temperature of the black body is now changed so that it radiates maximum energy around wavelength $\frac{3}{4}\lambda_0$,the power radiated by it will increase by a factor of

Three rods of Copper,Brass,and Steel are welded together to form a $Y$ shaped structure. The area of cross-section of each rod is $4 \ cm^2$. The end of the copper rod is maintained at $100^\circ C$,whereas the ends of the brass and steel rods are kept at $0^\circ C$. The lengths of the copper,brass,and steel rods are $46 \ cm$,$13 \ cm$,and $12 \ cm$ respectively. The rods are thermally insulated from the surroundings except at the ends. The thermal conductivities of copper,brass,and steel are $0.92$,$0.26$,and $0.12 \ CGS$ units respectively. The rate of heat flow through the copper rod is ....... $cal \ s^{-1}$.