$A$ completely filled water tank of height $h$ has a hole at the bottom. The total pressure at the bottom is $4H$ and the atmospheric pressure is $H$. The velocity of water flowing out of the hole is $(\rho = \text{density of water})$

$A$ container has a hole of cross-sectional area $1 \, cm^2$ at its bottom. If water is poured into the container at a rate of $70 \, cm^3/s$, what is the maximum height (in $cm$) to which the water can be filled?

$A$ cylindrical tank with a large diameter is filled with water. Water drains out through a hole at the bottom of the tank. If the cross-sectional area of the hole is $6 \ cm^2$,then the drainage rate in $m^3 s^{-1}$ when the depth of the water is $0.2 \ m$ is:

$A$ tank is filled with water of density $1 \, g/cm^3$ and oil of density $0.9 \, g/cm^3$. The height of the water layer is $100 \, cm$ and the height of the oil layer is $400 \, cm$. If $g = 980 \, cm/s^2$,then the velocity of efflux from an opening in the bottom of the tank is

$A$ large open-top water tank is completely filled with water. $A$ small hole of diameter $4 \,mm$ is made $10 \,m$ below the water level. The flow rate of water through the hole is (Acceleration due to gravity $= 10 \,m/s^2$)

$A$ cylindrical vessel of cross-sectional area $1000 \ cm^2$ is fitted with a frictionless piston of mass $10 \ kg$ and filled with water completely. $A$ small hole of cross-sectional area $10 \ mm^2$ is opened at a point $50 \ cm$ deep from the lower surface of the piston. The velocity of efflux from the hole will be ........... $m/s$.