Which of the following does not vary with pla | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) In a vacuum triode,the amplification factor $\mu$ is defined as the ratio of the change in plate voltage to the change in grid voltage for a const

Vedclass · Accepted Answer

$\mu$

Vedclass · Answer

(C) In a vacuum triode,the amplification factor $\mu$ is defined as the ratio of the change in plate voltage to the change in grid voltage for a constant plate current: $\mu = -\left( \frac{\Delta V_p}{\Delta V_g} ight)_{I_p = 	ext{constant}}$.This parameter $\mu$ is primarily determined by the physical geometry of the triode (the spacing between the cathode,grid,and plate).While the transconductance $g_m$ and the plate resistance $R_p$ are dependent on the operating point (plate voltage and grid voltage),the amplification factor $\mu$ remains approximately constant over a wide range of operating conditions.Therefore,$\mu$ does not vary significantly with plate or grid voltages.

Which of the following does not vary with plate or grid voltages in a vacuum triode?

Similar Questions

In a diode valve,the state of saturation can be obtained easily by

In an electron gun,the control grid is given a negative potential relative to the cathode in order to:

In a triode,${g_m} = 2 \times 10^{-3} \, \Omega^{-1}$,$\mu = 42$,and the resistance load $R_L = 50 \, \text{k}\Omega$. The voltage amplification obtained from this triode will be:

The value of plate current $I_P$ in the given circuit diagram will be in $mA$.

The relation between $I_p$ and $V_p$ for a triode is $I_p = (0.125V_p - 7.5) \text{ mA}$. Keeping the grid potential constant at $1 \text{ V}$,the value of $r_p$ will be . . . . . . $\text{k}\Omega$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module