In a triode,${g_m} = 2 \times 10^{-3} \, \Omega^{-1}$,$\mu = 42$,and the resistance load $R_L = 50 \, \text{k}\Omega$. The voltage amplification obtained from this triode will be:

The plate current in a triode is given by ${I_p} = 0.004 ({V_p} + 10{V_g})^{3/2} \text{ mA}$,where ${I_p}, {V_p}$ and ${V_g}$ are the values of plate current,plate voltage,and grid voltage,respectively. What are the triode parameters $\mu$,${r_p}$ and ${g_m}$ for the operating point at ${V_p} = 120 \text{ V}$ and ${V_g} = -2 \text{ V}$?

The variation of anode current $(I_p)$ in a triode corresponding to a change in grid potential $(V_g)$ at three different values of the plate potential $(V_p)$ is shown in the diagram. The mutual conductance $(g_m)$ of the triode is.........$ m \text{ mho}$.

$A$ triode whose mutual conductance is $2.5 \text{ mA/V}$ and anode resistance is $20 \text{ k}\Omega$,is used as an amplifier whose amplification factor is $10$. The load resistance connected in the plate circuit will be.....$\text{k}\Omega$.

The slope of the anode characteristic and the mutual characteristic of a triode are $0.02 \text{ mA/V}$ and $1 \text{ mA/V}$ respectively. The amplification factor of the valve is:

Coating of strontium oxide on a tungsten cathode in a valve is good for thermionic emission because: