Two heating coils, one of fine wire and the o | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The resistance of a wire is given by $R = \rho \frac{L}{A}$. Since the material $(\rho)$ and length $(L)$ are the same, $R \propto \frac{1}{A}$. T

Vedclass · Accepted Answer

In series, the fine wire liberates more energy, while in parallel, the thick wire liberates more energy.

Vedclass · Answer

(A) The resistance of a wire is given by $R = \rho \frac{L}{A}$. Since the material $(\rho)$ and length $(L)$ are the same, $R \propto \frac{1}{A}$. Thus, the fine wire has a smaller cross-sectional area $(A)$ and higher resistance $(R)$, while the thick wire has a larger area $(A)$ and lower resistance $(R)$.$1$. In series connection, the current $(I)$ is the same through both coils. The power dissipated is $P = I^2 R$. Since $P \propto R$, the coil with higher resistance (the fine wire) will liberate more energy.$2$. In parallel connection, the potential difference $(V)$ is the same across both coils. The power dissipated is $P = \frac{V^2}{R}$. Since $P \propto \frac{1}{R}$, the coil with lower resistance (the thick wire) will liberate more energy.

Two heating coils, one of fine wire and the other of thick wire of the same material and of the same length, are connected in series and in parallel. Which of the following statements is correct?

Similar Questions

The thermo-emf of a hypothetical thermocouple varies with the temperature $\theta$ of the hot junction as $E = a\theta + b\theta^2$ in volts,where the ratio $a/b$ is $700^{\circ}C$. If the cold junction is kept at $0^{\circ}C$,then the neutral temperature is:

In the circuit of the adjoining figure,the current through the $12 \ \Omega$ resistor will be ................ $A$.

Which of the following wiring diagrams could be used to experimentally determine $R$ using Ohm's law? Assume an ideal voltmeter and an ideal ammeter.

The temperature of the cold junction of a thermocouple is $0\,^{\circ}C$ and the temperature of the hot junction is $T\,^{\circ}C$. The e.m.f. is $E = 16T - 0.04T^2 \, \mu\text{V}$. The temperature of inversion is ................ $^{\circ}C$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module