The instantaneous velocity of point $B$ of a rod of length $0.5 \ m$ is $3 \ m/s$ at an angle of $30^{\circ}$ with the rod as shown. Find the angular velocity of the rod such that the velocity of end $A$ is minimum.

An equilateral prism of mass $m$ rests on a rough horizontal surface with coefficient of friction $\mu$. A horizontal force $F$ is applied on the prism at the top vertex $A$ as shown in the figure. If the coefficient of friction is sufficiently high so that the prism does not slide before toppling, then the minimum force required to topple the prism is $-$

$A$ rod of length $l$ is held vertically stationary with its lower end located at a point $P$ on a horizontal plane. When the rod is released to topple about $P$,the velocity of the upper end of the rod with which it hits the ground is

$A$ disc is rolling (without slipping) on a horizontal surface. $C$ is its center and $Q$ and $P$ are two points on the disc such that $Q$ is further from the contact point $O$ than $C$,and $P$ is closer to the contact point $O$ than $C$. Let $V_P, V_Q$ and $V_C$ be the magnitudes of the velocities of points $P, Q$ and $C$ respectively,then:

$A$ table has a heavy circular top of radius $1 \,m$ and mass $20 \,kg$ placed on four light (considered massless) legs placed symmetrically on its circumference. The maximum mass that can be kept anywhere on the table without toppling it is close to ............. $kg$.

$A$ ladder of length $L$ is slipping with its ends against a vertical wall and a horizontal floor. At a certain moment,the speed of the end in contact with the horizontal floor is $v$ and the ladder makes an angle $\alpha = 30^o$ with the horizontal. Then the speed of the ladder's center must be