Six identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at $100^{\circ} C$ and $10^{\circ} C$ respectively. The temperature of junction $C$ will be $.... ^{\circ} C$.

$A$ wall consists of two layers $A$ and $B$ of equal thickness. Their thermal resistances are $R_1$ and $R_2$. Find the temperature of the interface.

$A$ ring consisting of two parts $ADB$ and $ACB$ of same conductivity $k$ carries an amount of heat $H$. The $ADB$ part is now replaced with another metal keeping the temperatures $T_1$ and $T_2$ constant. The heat carried increases to $2H$. What should be the conductivity of the new $ADB$ part? Given $\frac{l_{ACB}}{l_{ADB}} = 3$.

Two cylinders $P$ and $Q$ have the same length and diameter and are made of different materials having thermal conductivities in the ratio $2 : 3$. These two cylinders are combined to make a single cylinder. One end of $P$ is kept at $100^{\circ}C$ and the other end of $Q$ is kept at $0^{\circ}C$. The temperature at the interface of $P$ and $Q$ is ...... $^{\circ}C$.

The temperatures of the two outer surfaces of a composite slab,consisting of two materials having coefficients of thermal conductivity $K$ and $2K$ and thickness $x$ and $4x$,respectively,are $T_2$ and $T_1$ $(T_2 > T_1)$. The rate of heat transfer through the slab in a steady state is $\left( \frac{A(T_2 - T_1)K}{x} \right)f$,where $f$ is equal to:

Three rods $A, B$ and $C$ of thermal conductivities $K, 2K$ and $4K$,cross-sectional areas $A, 2A$ and $2A$ and lengths $2l, l$ and $l$ respectively are connected as shown in the figure. If the ends of the rods are maintained at temperatures $100^{\circ}C, 50^{\circ}C$,and $0^{\circ}C$ respectively,then the temperature $\theta$ of the junction is ......... $^{\circ}C$