Same tension is applied to the following four wires made of same material. The elongation is longest in

$A$ copper wire $(Y = 1 \times 10^{11} \, N/m^2)$ of length $6 \, m$ and a steel wire $(Y = 2 \times 10^{11} \, N/m^2)$ of length $4 \, m$,each of cross-sectional area $10^{-5} \, m^2$,are fastened end to end and stretched by a tension of $100 \, N$. The elongation produced in the copper wire is ......... $mm$.

One end of a uniform wire of length $L$ and of weight $W$ is attached rigidly to a point in the roof and a weight $W_1$ is suspended from its lower end. If $A$ is the area of cross-section of the wire,the stress in the wire at a height $3L/4$ from its lower end is

Two copper wires $A$ and $B$ of lengths in the ratio $1: 2$ and diameters in the ratio $3: 2$ are stretched by forces in the ratio $3: 1$. The ratio of the elastic potential energies stored per unit volume in the wires $A$ and $B$ is

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

Write the unit and dimensional formula of modulus of elasticity.