In the case of vertical circular motion of a | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Let the particle be at a point $P$ where the thread makes an angle of $30^{\circ}$ with the horizontal. The angle with the vertical is $	heta = 9

Vedclass · Accepted Answer

$\sqrt{\frac{7}{2}gr}$

Vedclass · Answer

(B) Let the particle be at a point $P$ where the thread makes an angle of $30^{\circ}$ with the horizontal. The angle with the vertical is $	heta = 90^{\circ} - 30^{\circ} = 60^{\circ}$.At this point, the forces acting along the radial direction are the tension $T$ and the component of gravity $mg \cos 60^{\circ}$.The equation of motion is $T + mg \cos 60^{\circ} = \frac{mv^2}{r}$.Given that the tension $T = 0$ at this point, we have $mg \cos 60^{\circ} = \frac{mv^2}{r}$.Since $\cos 60^{\circ} = \frac{1}{2}$, we get $mg(\frac{1}{2}) = \frac{mv^2}{r}$, which simplifies to $v^2 = \frac{gr}{2}$.Now, apply the law of conservation of mechanical energy between the bottom point $A$ and point $P$.The height of point $P$ above point $A$ is $h = r + r \sin 30^{\circ} = r + r(\frac{1}{2}) = \frac{3r}{2}$.Let $u$ be the velocity at point $A$. Then, $\frac{1}{2}mu^2 = \frac{1}{2}mv^2 + mgh$.Substituting the values: $\frac{1}{2}mu^2 = \frac{1}{2}m(\frac{gr}{2}) + mg(\frac{3r}{2})$.$u^2 = \frac{gr}{2} + 3gr = \frac{7gr}{2}$.Therefore, the velocity at the bottom point is $u = \sqrt{\frac{7}{2}gr}$.

In the case of vertical circular motion of a particle attached to a thread of length $r$, if the tension in the thread is zero at an angle of $30^{\circ}$ with the horizontal as shown in the figure, the velocity at the bottom point $(A)$ of the circular path is ($g =$ gravitational acceleration).

Similar Questions

$A$ particle starts sliding from the top of a sphere of diameter $42 \, m$. At what height from the bottom of the sphere will the particle lose contact with the sphere?

$A$ body of mass $0.4\, kg$ is whirled in a vertical circle making $2\, rev/sec$. If the radius of the circle is $2\, m$,then tension in the string when the body is at the top of the circle,is ......... $N$.

$A$ body of mass $m$ slides down along a frictionless inclined plane from height $h$ and just completes motion in a vertical circle of radius $R = 2 \ m$ after reaching the bottom. What is the value of $h$? [Use $g = 10 \ m/s^2$]

The minimum horizontal speed with which a body must be projected, so that it goes around a smooth vertical circular track of radius $4 \,m$ is $(g=9.8 \,ms^{-2})$. (in $\,ms^{-1}$)

$A$ particle is moving in a vertical circle. The tensions in the string when passing through two positions at angles $30^\circ$ and $60^\circ$ from the vertical (lowest position) are $T_1$ and $T_2$ respectively. Then:

Vedclass Test Series

Exam Paper Generator

Online Exam Module