For a series LCR circuit,which one of the fol | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) In a series $LCR$ circuit,the current $I$ is the same through all components.$1$. The potential difference across the resistor $(V_R)$ is in phase

Vedclass · Accepted Answer

Potential difference across $R$ and that across the capacitor have a phase difference of $\frac{\pi}{2}$.

Vedclass · Answer

(A) In a series $LCR$ circuit,the current $I$ is the same through all components.$1$. The potential difference across the resistor $(V_R)$ is in phase with the current $I$.$2$. The potential difference across the capacitor $(V_C)$ lags behind the current $I$ by $\frac{\pi}{2}$.$3$. The potential difference across the inductor $(V_L)$ leads the current $I$ by $\frac{\pi}{2}$.Evaluating the options:$(A)$ The potential difference across $R$ $(V_R)$ is in phase with $I$,and the potential difference across the capacitor $(V_C)$ lags behind $I$ by $\frac{\pi}{2}$. Therefore,the phase difference between $V_R$ and $V_C$ is $\frac{\pi}{2}$. This is $CORRECT$.$(B)$ The applied e.m.f. $(V)$ leads or lags the current $I$ by a phase angle $\phi$,while $V_R$ is in phase with $I$. Thus,$V$ and $V_R$ are not in the same phase. This is $INCORRECT$.$(C)$ The phase difference between the applied e.m.f. $(V)$ and $V_L$ is $(\frac{\pi}{2} - \phi)$. This is $INCORRECT$.$(D)$ $V_L$ leads $I$ by $\frac{\pi}{2}$ and $V_C$ lags $I$ by $\frac{\pi}{2}$. Thus,the phase difference between $V_L$ and $V_C$ is $\pi$. This is $INCORRECT$.

For a series $LCR$ circuit,which one of the following is a $CORRECT$ statement?

Similar Questions

An electric bulb has a rated power of $50 \, W$ at $100 \, V$. If it is used on an $AC$ source of $200 \, V, 50 \, Hz$, a choke has to be used in series with it. This choke should have an inductance of (in $ \, H$)

The following series $L-C-R$ circuit,when driven by an emf source of angular frequency $70 \text{ krad/s}$,behaves effectively as:

When $100 \, V$ $DC$ is supplied across a solenoid,a current of $1.0 \, A$ flows in it. When $100 \, V$ $AC$ is applied across the same coil,the current drops to $0.5 \, A$. If the frequency of the $AC$ source is $50 \, Hz$,then the impedance and inductance of the solenoid are:

The power factor of a $CR$ circuit is $\frac{1}{\sqrt{2}}$. If the frequency of an $AC$ signal is halved,then the power factor of the circuit will become:

Vedclass Test Series

Exam Paper Generator

Online Exam Module