Consider a small block sliding down an inclined plane of inclination $30^{\circ}$ with the horizontal. The coefficient of friction is $\mu = \frac{2}{3} x$,where $x$ is the distance (in meters) through which the mass slides down. The distance covered by the mass before it stops is

As shown in the figure,a body of mass $m$ moving vertically downward with a speed of $3\, m/s$ hits a smooth fixed inclined plane and rebounds with a velocity $v_f$ in the horizontal direction. If the angle of the inclined plane is $30^{\circ}$,the velocity $v_f$ will be:

$A$ block of base $10 \ cm \times 10 \ cm$ and height $15 \ cm$ is kept on an inclined plane. The coefficient of friction between them is $\sqrt{3}$. The inclination $\theta$ of this inclined plane from the horizontal plane is gradually increased from $0^{\circ}$. Then

The upper half of an inclined plane of inclination $\theta$ is perfectly smooth,while the lower half is rough. $A$ body starting from rest at the top comes back to rest at the bottom. The coefficient of friction $\mu$ for the lower half is given by:

Two blocks $A$ and $B$ of equal masses are sliding down along straight parallel lines on an inclined plane of $45^{\circ}$. Their coefficients of kinetic friction are $\mu_A = 0.2$ and $\mu_B = 0.3$ respectively. At $t = 0$,both the blocks are at rest and block $A$ is $\sqrt{2} \text{ m}$ behind block $B$. Calculate the time and distance from the initial position where the front faces of the blocks come in line on the inclined plane as shown in the figure. (Use $g = 10 \text{ m/s}^2$)

$A$ block rests on a rough inclined plane making an angle of $30^o$ with the horizontal. The coefficient of static friction between the block and the plane is $0.8$. If the frictional force on the block is $10 \, N$,the mass of the block (in $kg$) is (take $g = 10 \, m/s^2$)