Column-$I$ gives certain physical quantities associated with the flow of current through a metallic conductor. Column-$II$ gives some mathematical relations involving electrical quantities. Match Column-$I$ and Column-$II$ with appropriate relations.
$A$. Mobility$P$. $\frac{m}{ne^2 \rho}$
$B$. Electrical conductivity$Q$. $neAv_{d}$
$C$. Relaxation period$R$. $\frac{v_{d}}{E}$
$D$. Current$S$. $\frac{J}{E}$

  • A
    $A \rightarrow R ; B \rightarrow S ; C \rightarrow P ; D \rightarrow Q$
  • B
    $A \rightarrow R ; B \rightarrow S ; C \rightarrow Q ; D \rightarrow P$
  • C
    $A \rightarrow R ; B \rightarrow P ; C \rightarrow S ; D \rightarrow Q$
  • D
    $A \rightarrow R ; B \rightarrow Q ; C \rightarrow S ; D \rightarrow P$

Explore More

Similar Questions

Three identical resistors are connected in series,and the total power consumed is $10 \, W$. If they are connected in parallel,what will be the total power consumed in $W$?

If for a thermocouple ${T_n}$ is the neutral temperature,${T_c}$ is the temperature of the cold junction,and ${T_i}$ is the temperature of inversion,then:

Answer the following questions:
$(a)$ $A$ steady current flows in a metallic conductor of non-uniform cross-section. Which of these quantities is constant along the conductor: current, current density, electric field, drift speed?
$(b)$ Is Ohm's law universally applicable for all conducting elements? If not, give examples of elements which do not obey Ohm's law.
$(c)$ $A$ low voltage supply from which one needs high currents must have very low internal resistance. Why?
$(d)$ $A$ high tension $(HT)$ supply of, say, $6 \ kV$ must have a very large internal resistance. Why?

$A$ torch bulb rated as $4.5\, W$,$1.5\, V$ is connected as shown in the figure. The $e.m.f.$ of the cell needed to make the bulb glow at full intensity is ................ $V$.

Difficult
View Solution

At time $t = 0$,terminal $A$ in the circuit shown in the figure is connected to $B$ by a key and alternating current $I(t) = I_0 \cos(\omega t)$,with $I_0 = 1 \text{ A}$ and $\omega = 500 \text{ rad s}^{-1}$ starts flowing in it with the initial direction shown in the figure.
At $t = \frac{7\pi}{6\omega}$,the key is switched from $B$ to $D$. Now onwards only $A$ and $D$ are connected. $A$ total charge $Q$ flows from the battery to charge the capacitor fully. If $C = 20 \mu\text{F}$,$R = 10 \Omega$ and the battery is ideal with emf of $50 \text{ V}$,identify the correct statement$(s)$.
$(A)$ Magnitude of the maximum charge on the capacitor before $t = \frac{7\pi}{6\omega}$ is $1 \times 10^{-3} \text{ C}$.
$(B)$ The current in the left part of the circuit just before $t = \frac{7\pi}{6\omega}$ is clockwise.
$(C)$ Immediately after $A$ is connected to $D$,the current in $R$ is $10 \text{ A}$.
$(D)$ $Q = 2 \times 10^{-3} \text{ C}$.

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo