A moving coil galvanometer has a coil with 17 | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The torque on the coil in a magnetic field is given by $	au = N I A B \sin(	heta)$. Since the magnetic field is parallel to the plane of the coi

Vedclass · Accepted Answer

$10^{-2}$

Vedclass · Answer

(D) The torque on the coil in a magnetic field is given by $	au = N I A B \sin(	heta)$. Since the magnetic field is parallel to the plane of the coil,the angle between the normal to the coil and the magnetic field is $90^{\circ}$,so $\sin(90^{\circ}) = 1$.The restoring torque provided by the torsion band is $	au = C \phi$,where $C = 10^{-6} \, N \cdot m/rad$ and $\phi = 10^{\circ} = 10 	imes \frac{\pi}{180} \, rad$.Equating the torques: $C \phi = N I A B$.Given values: $N = 175$,$I = 1 \, mA = 10^{-3} \, A$,$A = 1 \, cm^2 = 10^{-4} \, m^2$,$C = 10^{-6} \, N \cdot m/rad$,and $\phi = \frac{\pi}{18} \, rad$.Substituting the values: $10^{-6} 	imes \frac{\pi}{18} = 175 	imes 10^{-3} 	imes 10^{-4} 	imes B$.$B = \frac{10^{-6} 	imes \pi}{18 	imes 175 	imes 10^{-7}} = \frac{10 	imes \pi}{18 	imes 175} \approx \frac{31.4}{3150} \approx 0.0099 \approx 10^{-2} \, T$.

Similar Questions

$A$ galvanometer has $36\,\Omega$ resistance. If a $4\,\Omega$ shunt is added to this,the fraction of current that passes through the shunt is

In a suspended-type moving coil galvanometer,a quartz suspension is used because:

$A$ moving coil galvanometer has $150$ equal divisions. Its current sensitivity is $10$ divisions per milliampere and voltage sensitivity is $2$ divisions per millivolt. In order that each division reads $1 \, V$,the resistance in $\Omega$ needed to be connected in series with the coil will be

An ammeter with a resistance of $1\, \Omega$ can measure up to $10\, mA$. To convert it into a voltmeter that can measure up to $10\, V$,what resistance (in $\Omega$) must be connected in series?

The scale of a galvanometer is divided into $160$ equal divisions. The galvanometer shows full scale deflection of $16$ mA and maximum voltage is $80$ mV. Now the range is changed so that the galvanometer reads $160$ $V$. The required resistance to be connected is

Vedclass Test Series

Exam Paper Generator

Online Exam Module