When a shunt resistance of $4r$ is connected to a galvanometer,it becomes an ammeter that can measure $0.03 \, A$. When a shunt resistance of $r$ is connected to the same galvanometer,it becomes an ammeter that can measure $0.06 \, A$. What is the current capacity $(i_g)$ of the galvanometer in $A$?

$A$ galvanometer $G$ deflects full scale when a potential difference of $0.50 \ V$ is applied. The internal resistance of the galvanometer $r_g$ is $25 \ \Omega$. An ammeter is constructed by incorporating the galvanometer and an additional shunt resistance $R_S$. The ammeter deflects full scale when a measurement of $2.0 \ A$ is made. The resistance $R_S$ is closest to : ................. $\Omega$

$A$ galvanometer gives a full-scale reading of $50 \ mA$,when a potential difference across its terminals is $0.15 \ V$. It can be used as an ammeter of range $0 - 100 \ A$ by connecting a shunt resistance of: (in $Omega$)

The percentage error in the reading of the voltmeter in the figure shown here is nearly ............ $\%$

$A$ galvanometer of resistance $G$ is shunted by a resistance $S$. To keep the main current in the circuit unchanged,what value of resistance should be connected in series with the galvanometer?

The circular coil of a galvanometer has $50$ turns. The coil has a radius of $1 \ cm$. The coil is placed in a radial magnetic field of $0.010 \ T$. The torsion coefficient of the spring on which the coil hangs is $3 \times 10^{-7} \ N-m-rad^{-1}$. Determine the deflection of the galvanometer's pointer if the current through the coil is $1.0 \ mA$. (in $^{\circ}$)