What is the tensile stress on the cross-secti | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) Tensile stress is defined as the normal force per unit area acting on the cross-section.Let $A$ be the area of the cross-section perpendicular to

Vedclass · Accepted Answer

$F \cos^2 	heta / A$

Vedclass · Answer

(C) Tensile stress is defined as the normal force per unit area acting on the cross-section.Let $A$ be the area of the cross-section perpendicular to the force $F$.The area of the inclined cross-section $PQRS$ is $A' = A / \cos 	heta$.The component of the force $F$ normal to the cross-section $PQRS$ is $F_N = F \cos 	heta$.Therefore,the tensile stress $\sigma$ is given by:$\sigma = \frac{F_N}{A'} = \frac{F \cos 	heta}{A / \cos 	heta} = \frac{F \cos^2 	heta}{A}$.

What is the tensile stress on the cross-section $PQRS$?

Similar Questions

The substances having a very short plastic region are

The value of tension in a long thin metal wire has been changed from $T_{1}$ to $T_{2}$. The lengths of the metal wire at two different values of tension $T_{1}$ and $T_{2}$ are $l_{1}$ and $l_{2}$ respectively. The actual length of the metal wire is:

The elastic limit of a metal is $\frac{400}{\pi} \text{ MPa}$. If a rod of this metal is to support a $484 \text{ N}$ load without exceeding its elastic limit, the minimum diameter of the rod is: (in $\text{ mm}$)

The longitudinal strain is only possible in

Two wires $A$ and $B$ are stretched by the same load. If the area of cross-section of wire $A$ is double that of wire $B$,then the stress on wire $B$ is

Vedclass Test Series

Exam Paper Generator

Online Exam Module