Two plates of thermal conductivities k_1 and | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) When two slabs of the same thickness $l$ but different cross-sectional areas $A_1$ and $A_2$ are connected in parallel,the total rate of heat flow

Vedclass · Accepted Answer

$\frac{k_1 A_1 + k_2 A_2}{A_1 + A_2}$

Vedclass · Answer

(C) When two slabs of the same thickness $l$ but different cross-sectional areas $A_1$ and $A_2$ are connected in parallel,the total rate of heat flow $\frac{dQ}{dt}$ is the sum of the heat flow rates through each slab.The rate of heat flow through a slab is given by $\frac{dQ}{dt} = k A \frac{(T_1 - T_2)}{l}$.Since the slabs are in parallel,the total heat flow rate is $\frac{dQ}{dt} = \frac{dQ_1}{dt} + \frac{dQ_2}{dt}$.Substituting the expressions for each:$k (A_1 + A_2) \frac{(T_1 - T_2)}{l} = k_1 A_1 \frac{(T_1 - T_2)}{l} + k_2 A_2 \frac{(T_1 - T_2)}{l}$.Canceling the common terms $\frac{(T_1 - T_2)}{l}$ from both sides:$k (A_1 + A_2) = k_1 A_1 + k_2 A_2$.Therefore,the equivalent thermal conductivity $k$ is:$k = \frac{k_1 A_1 + k_2 A_2}{A_1 + A_2}$.

Two plates of thermal conductivities $k_1$ and $k_2$,cross-sectional areas $A_1$ and $A_2$,and the same thickness $l$ are joined as shown in the figure. The equivalent thermal conductivity $k$ of the combination is:

Similar Questions

Six identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at temperatures of $200^oC$ and $20^oC$ respectively. The temperature of junction $B$ will be ....... $^oC$.

Three identical rods have been joined at a junction to make a $Y$-shaped structure. If two free ends are maintained at $90\,^{\circ}C$ and the third end is at $30\,^{\circ}C$,what is the junction temperature $\theta$ in $^{\circ}C$?

Two rods of the same length and material transfer a given amount of heat in $12 \ s$ when they are joined end to end. But when they are joined lengthwise parallel to each other,they will transfer the same amount of heat under the same conditions in a time of: (in $s$)

Two identical metal rods are welded end-to-end as shown in figure $(1)$. It takes $4 \ min$ for $20 \ cal$ of heat to flow through them. If these rods are now welded side-by-side as shown in figure $(2)$,the time taken for the same amount of heat to flow through them is .......... $\min$.

$A$ composite slab is made of two different materials of equal thickness,having thermal conductivities $K$ and $2K$ respectively. The equivalent thermal conductivity of the slab is ........

Vedclass Test Series

Exam Paper Generator

Online Exam Module