$A$ metal disc of radius $30 \ cm$ rotates with a constant angular velocity $\omega = 100 \ rad/s$ about its axis. Find the magnitude of the potential difference between the centre and the rim of the disc if an external uniform magnetic field of induction $B = 4 \ mT$ is directed perpendicular to the disc. (in $mV$)

$A$ conducting wire of length $2500 \ m$ is kept in the east-west direction at a height of $10 \ m$ from the ground. If it falls freely to the ground,the induced current in the wire is (Resistance of wire $= 25 \sqrt{2} \ \Omega$,acceleration due to gravity $g = 10 \ m/s^2$,$B_H = 2 \times 10^{-5} \ T$). (in $A$)

If a wheel with $24$ metallic spokes each $40 \ cm$ long is rotated with a speed of $180 \ rev/min$ in a plane normal to the horizontal component of earth's magnetic field, the emf induced between the axle and the rim of the wheel is $E$. If the number of spokes is made $12$ and the wheel is rotated with a speed of $90 \ rev/min$ in the same field, the induced emf is

$A$ rectangular loop has a sliding connector $PQ$ of length $l$ and resistance $R \ \Omega$ and it is moving with a speed $v$ as shown. The set-up is placed in a uniform magnetic field going into the plane of the paper. The three currents $I_1, I_2$ and $I$ are:

$A$ circular coil of radius $10 \, cm$ and resistance of $2 \, \Omega$ is placed with its plane perpendicular to the horizontal component of the earth's magnetic field. It is rotated about its vertical diameter through $180^{\circ}$ in $0.25 \, s$. If the magnitude of the induced emf is $3.8 \times 10^{-3} \, V$, then the number of turns of the coil is (Horizontal component of earth's magnetic field at the place is $3 \times 10^{-5} \, T$) (in $turns$)

$A$ conducting rod of length $L$ rotates with angular speed $\omega$ in a uniform magnetic field of induction $B$ which is perpendicular to its motion. The induced emf developed between the two ends of the rod is