Which of the following is not a method of reducing friction?

  • A
    Using ball bearings
  • B
    Applying grease
  • C
    Applying paint
  • D
    Forming a thin air cushion

Explore More

Similar Questions

In the diagram,$BAC$ is a rigid fixed rough wire and angle $BAC$ is $60^o$. $P$ and $Q$ are two identical rings of mass $m$ connected by a light elastic string of natural length $2a$ and elastic constant $k = \frac{mg}{a}$. If $P$ and $Q$ are in equilibrium when $PA = AQ = 3a$,then the least coefficient of friction between the ring and the wire is $\mu$. Find the value of $\mu + \sqrt{3}$.

Place a uniform meter scale horizontally on your extended index fingers with the left one at $0.00 \ cm$ and the right one at $90.00 \ cm$. When you attempt to move both fingers slowly towards the center,initially only the left finger slips with respect to the scale and the right finger does not. After some distance,the left finger stops and the right one starts slipping. Then the right finger stops at a distance $x_R$ from the center $(50.00 \ cm)$ of the scale and the left one starts slipping again. This happens because of the difference in the frictional forces on the two fingers. If the coefficients of static and dynamic friction between the fingers and the scale are $0.40$ and $0.32$,respectively,the value of $x_R$ (in $cm$) is:

$A$ disc of mass $100 \,g$ slides down from rest on an inclined plane of $30^{\circ}$ and comes to rest after travelling a distance of $1 \,m$ along the horizontal plane. If the coefficient of friction is $0.2$ for both inclined and horizontal planes, then the work done by the frictional force over the whole journey, approximately, is (Acceleration due to gravity, $g=10 \,ms^{-2}$) (in $\,J$)

In the figure shown,all surfaces are frictionless,and the mass of the block is $m = 1\, kg$. The block and wedge are held initially at rest. Now,the wedge is given a horizontal acceleration of $a = 10\, m/s^2$ by applying a force on the wedge,such that the block does not slip on the wedge. Calculate the work done by the normal force in the ground frame on the block in $\sqrt{3}$ seconds. (Assume $\tan \theta = a/g = 1$,so $\theta = 45^\circ$)

Consider the diagram shown below in which two masses of $m$ and $2m$ are placed on a fixed triangular wedge. The coefficient of friction between block $A$ (mass $m$) and the wedge is $\mu_A = 2/3$,while that for block $B$ (mass $2m$) and the wedge is $\mu_B = 1/3$. Find the acceleration of the system.

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo