Two cells of e.m.f.s $E_1$ and $E_2$ $(E_1 > E_2)$ are connected as shown in the figure. When the potentiometer is connected between $A$ and $B$,the balancing length of the potentiometer wire is $3.60 \ m$. On connecting the potentiometer between $A$ and $C$,the balancing length is $0.90 \ m$. The ratio $E_1 / E_2$ is

In the circuit shown, a four-wire potentiometer is made of a $400\, cm$ long wire, which extends between $A$ and $B$. The resistance per unit length of the potentiometer wire is $r = 0.01\, \Omega /cm$. If an ideal voltmeter is connected as shown with jockey $J$ at $50\, cm$ from end $A$, the expected reading of the voltmeter will be: ............... $V$

In an experiment to find the $emf$ of a cell using a potentiometer,the length of the null point for a cell of $emf$ $1.5 \ V$ is found to be $60 \ cm$. If this cell is replaced by another cell of $emf$ $E$,the length of the null point increases by $40 \ cm$. The value of $E$ is $\frac{x}{10} \ V$. The value of $x$ is $............$

To determine the internal resistance of a cell by using a potentiometer, the null point is at $1 \, m$ when the cell is shunted by $3 \, \Omega$ resistance and at a length $1.5 \, m$ when the cell is shunted by $6 \, \Omega$ resistance. The internal resistance of the cell is:

The length of a wire of a potentiometer is $100 \, cm$,and the $emf$ of its standard cell is $E \, volt$. It is employed to measure the $emf$ of a battery whose internal resistance is $0.5 \, \Omega$. If the balance point is obtained at $l = 30 \, cm$ from the positive end,the $emf$ of the battery is (where $i$ is the current in the potentiometer wire).

In a potentiometer of $10$ wires,the balance point is obtained on the $6^{\text{th}}$ wire. To shift the balance point to the $8^{\text{th}}$ wire,we should: