Three discs $A, B$ and $C$ having radii $2\; m, 4\; m,$ and $6\; m$ respectively are coated with carbon black on their outer surfaces. The wavelengths corresponding to maximum intensity are $300\; nm, 400\; nm$ and $500\; nm$ respectively. The power radiated by them are $Q_A, Q_B$ and $Q_C$ respectively. Which of the following is true?

$A$ wall with a cavity consists of two layers of brick separated by a layer of air. All three layers have the same thickness,and the thermal conductivity of the brick is much greater than that of air. The left layer is at a higher temperature than the right layer,and a steady-state condition exists. Which of the following graphs correctly predicts the variation of temperature $T$ with distance $d$ inside the cavity?

Four rods of identical cross-sectional area and made from the same metal form the sides of a square. The temperatures of two diagonally opposite points $A$ and $B$ are $\sqrt{2}T$ and $T$ respectively in the steady state. Assuming that only heat conduction takes place,what will be the temperature difference between the other two points $C$ and $D$?

Power radiated by a black body at temperature $T_1$ is $P$ and it radiates maximum energy at a wavelength $\lambda_1$. If the temperature of the black body is changed from $T_1$ to $T_2$,it radiates maximum energy at a wavelength $\frac{\lambda_1}{2}$. The power radiated at $T_2$ is (in $P$)

$A$ long metallic bar is carrying heat from one of its ends to the other end under steady-state. The variation of temperature $\theta$ along the length $x$ of the bar from its hot end is best described by which of the following figures?

If heat conduction in Figure $1$ takes $12 \, sec$,how much time (in $sec$) will it take for the same amount of heat to be conducted in Figure $2$?