The slopes of the anode and mutual characteri | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The slope of the anode characteristic curve is given by $\frac{1}{r_p}$,where $r_p$ is the plate resistance.Given $\frac{1}{r_p} = 0.02 \, mA/V =

Vedclass · Accepted Answer

$50$

Vedclass · Answer

(B) The slope of the anode characteristic curve is given by $\frac{1}{r_p}$,where $r_p$ is the plate resistance.Given $\frac{1}{r_p} = 0.02 \, mA/V = 0.02 	imes 10^{-3} \, A/V$.Therefore,$r_p = \frac{1}{0.02 	imes 10^{-3}} \, \Omega = 50 	imes 10^3 \, \Omega = 50 \, k\Omega$.The slope of the mutual characteristic curve is the transconductance $g_m$.Given $g_m = 1 \, mA/V = 1 	imes 10^{-3} \, A/V$.The amplification factor $\mu$ is defined as $\mu = r_p 	imes g_m$.Substituting the values: $\mu = (50 	imes 10^3 \, \Omega) 	imes (1 	imes 10^{-3} \, A/V) = 50$.Thus,the amplification factor is $50$.

The slopes of the anode and mutual characteristics of a triode are $0.02 \, mA/V$ and $1 \, mA/V$ respectively. What is the amplification factor of the valve?

Similar Questions

The mutual characteristic curves of a triode are as shown in the figure. The cut-off voltage for the triode is.....$V$.

$14 \times 10^{15}$ electrons reach the anode per second. If the power consumed is $448 \text{ mW}$,then the plate (anode) voltage is .... $V$.

The correct relation for a triode is

The point representing the cut-off grid voltage on the mutual characteristic of a triode is:

In a triode amplifier,$\mu = 25$,$r_p = 40 \text{ k}\Omega$,and load resistance $R_L = 10 \text{ k}\Omega$. If the input signal voltage is $0.5 \text{ V}$,then the output signal voltage will be.....$\text{V}$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module