The length of a metal bar is $20 \ cm$ and the area of cross-section is $4 \times 10^{-4} \ m^2$. If one end of the rod is kept in ice at $0^{\circ} C$ and the other end is kept in steam at $100^{\circ} C$,the mass of ice melted in one minute is $5 \ g$. The thermal conductivity of the metal in $W \ m^{-1} \ K^{-1}$ is (Latent heat of fusion $= 80 \ cal/g$):

There are two identical vessels filled with equal amounts of ice. The vessels are made of different metals. If the ice melts in the two vessels in $20$ and $35$ minutes respectively,the ratio of the coefficients of thermal conductivity of the two metals is:

An aluminium rod of length $1 \,m$ and a steel rod of length $2 \,m$, both having the same cross-sectional area, are soldered together end-to-end. The thermal conductivity of the aluminium rod and the steel rod is $200 \,Js^{-1} \,m^{-1} \,K^{-1}$ and $50 \,Js^{-1} \,m^{-1} \,K^{-1}$ respectively. The temperatures of the free ends are maintained at $300 \,K$ and $500 \,K$. What is the temperature of the junction (in $\,K$)?

$A$ slab of stone of area $3600 \, cm^2$ and thickness $10 \, cm$ is exposed on the lower surface to steam at $100^{\circ} C$. $A$ block of ice at $0^{\circ} C$ rests on the upper surface of the slab. In one hour, $4.8 \, kg$ of ice is melted. The thermal conductivity of the stone in $J \, s^{-1} \, m^{-1} \, K^{-1}$ is (Latent heat of ice $= 3.36 \times 10^5 \, J/kg$)

Three metal rods made of copper, brass, and steel, each with a cross-sectional area of $4 \,cm^2$, are joined as shown in the figure. Their lengths are $46 \,cm, 13 \,cm$, and $12 \,cm$ respectively. Their coefficients of thermal conductivity are $0.92, 0.26$, and $0.12$ respectively, all in $CGS$ units. The rods are thermally insulated from the surroundings except at the ends. The rate of flow of heat through the copper rod, in $cal \,s^{-1}$, is:

On heating one end of a rod,the temperature of the whole rod will be uniform when