The function of a detector is to demodulate t | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) In the demodulation process,the detector performs the following functions:$(a)$ Rectification: This process converts all negative-going peaks into

Vedclass · Accepted Answer

rectification and filtering

Vedclass · Answer

(C) In the demodulation process,the detector performs the following functions:$(a)$ Rectification: This process converts all negative-going peaks into positive-going peaks,effectively allowing the envelope of the modulated wave to be extracted.$(b)$ Filtering: This step involves the separation of the high-frequency carrier components from the low-frequency message signal using a low-pass filter,leaving only the original information signal.

The function of a detector is to demodulate the modulated carrier wave and the steps for this process are

Similar Questions

$AM$ is used for broadcasting because...

Sound waves cannot be transmitted directly after conversion into electrical waves because...

Range of frequencies allotted for commercial $FM$ radio broadcast is

If a $TV$ transmission antenna covers a radius of $128 \, km$,what should be the height of the antenna in $m$?

Radio waves of constant amplitude are produced by a/an . . . . . . .

Vedclass Test Series

Exam Paper Generator

Online Exam Module