One end of a steel wire is fixed to the ceiling of an elevator moving up with an acceleration $2 \ m/s^2$ and a load of $10 \ kg$ hangs from the other end. If the cross-section of the wire is $2 \ cm^2$,then the longitudinal strain in the wire will be ($g = 10 \ m/s^2$ and $Y = 2.0 \times 10^{11} \ N/m^2$).

Two blocks of masses $1 \,kg$ and $2 \,kg$ are connected by a metal wire going over a smooth pulley. The breaking stress of metal is $\frac{40}{3 \pi} \times 10^6 \,N m^{-2}$. What should be the minimum radius of the wire used if it should not break (in $mm$)? $(g = 10 \,m s^{-2})$

Statement $(A)$ For an ideal liquid,the bulk modulus is infinite and the shear modulus is zero.
Statement $(B)$ The volume contraction of a metal cube of bulk modulus $140 \text{ GPa}$ and side length $10 \text{ cm}$,when subjected to a hydraulic pressure of $7 \times 10^6 \text{ Pa}$,is $-0.05 \text{ m}^3$.
Statement $(C)$ $A$ spiral spring is stretched by a weight attached to it. The strain is tensile.

$A$ metal wire of length $0.5\; m$ and cross-sectional area $10^{-4}\; m^{2}$ has a breaking stress of $5 \times 10^{8}\; N/m^{2}$. $A$ block of mass $10\; kg$ is attached to one end of the wire and is rotated in a horizontal circle. The maximum linear velocity of the block will be $v\; m/s$. Find $v$.

$A$ steel wire can sustain $100\,kg$ weight without breaking. If the wire is cut into two equal parts, each part can sustain a weight of ......... $kg$.

$A$ light rod of length $200\,cm$ is suspended from the ceiling horizontally by means of two vertical wires of equal length tied to its ends. One of the wires is made of steel and has a cross-section of $0.1\,cm^2$,and the other is made of brass with a cross-section of $0.2\,cm^2$. At what distance from the steel wire should a weight be hung along the rod to produce equal stresses in both wires?