In the Wheatstone's bridge shown,P = 2,Omega, | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) For a Wheatstone bridge to be balanced,the ratio of resistances in the arms must satisfy the condition $\frac{P}{Q} = \frac{S'}{R}$,where $S'$ is

Vedclass · Accepted Answer

$8$

Vedclass · Answer

(D) For a Wheatstone bridge to be balanced,the ratio of resistances in the arms must satisfy the condition $\frac{P}{Q} = \frac{S'}{R}$,where $S'$ is the effective resistance of the arm containing $S$ with a shunt $r$ connected in parallel.Given $P = 2\,\Omega$,$Q = 3\,\Omega$,$R = 6\,\Omega$,and $S = 8\,\Omega$.The effective resistance $S'$ of $S$ and $r$ in parallel is given by $S' = \frac{S \cdot r}{S + r} = \frac{8r}{8 + r}$.Substituting the values into the balance condition:$\frac{2}{3} = \frac{8r / (8 + r)}{6}$$\frac{2}{3} = \frac{8r}{6(8 + r)}$$12(8 + r) = 24r$$96 + 12r = 24r$$12r = 96$$r = 8\,\Omega$.Thus,the required shunt resistance is $8\,\Omega$.

In the Wheatstone's bridge shown,$P = 2\,\Omega$,$Q = 3\,\Omega$,$R = 6\,\Omega$ and $S = 8\,\Omega$. In order to obtain balance,the shunt resistance across '$S$' must be ............. $\Omega$.

Similar Questions

In the circuit shown,$E_1 = 4.0 \ V, R_1 = 2 \ \Omega, E_2 = 6.0 \ V, R_2 = 4 \ \Omega$ and $R_3 = 2 \ \Omega$. The current $I_1$ is : ................ $A$

The figure below shows a portion of an electric circuit with the currents in amperes and their directions. The magnitude and direction of the current in the portion $PQ$ is

$A$ Wheatstone bridge is used to determine the value of an unknown resistance $X$ by adjusting the variable resistance $Y$ as shown in the figure. For the most precise measurement of $X$,the resistances $P$ and $Q$:

The potential difference between $A$ and $B$ in the following figure is (in $V$)

$A$ battery of $6\,V$ is connected to the circuit as shown below. The current $I$ drawn from the battery is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module