In the following circuit,an $AC$ input $V_i(t) = (20 \text{ mV}) \sin(10^5 t)$ is applied at the left end. The amplitude of the output voltage $V_0$ at the right end across the capacitor will be (in $mV$)

When $100 \, V$ $DC$ is supplied across a solenoid,a current of $1.0 \, A$ flows in it. When $100 \, V$ $AC$ is applied across the same coil,the current drops to $0.5 \, A$. If the frequency of the $AC$ source is $50 \, Hz$,then the impedance and inductance of the solenoid are:

An inductor of reactance $1 \Omega$ and a resistor of resistance $3 \Omega$ are connected in series to the terminals of a $10 \ V$ (rms) $AC$ source. The power dissipated in the circuit is (in $W$)

In a circuit,a metal filament lamp is connected in series with a capacitor of capacitance $C \mu F$ across a $200 V, 50 Hz$ supply. The power consumed by the lamp is $500 W$ while the voltage drop across it is $100 V$. Assume that there is no inductive load in the circuit. Take $rms$ values of the voltages. The magnitude of the phase-angle (in degrees) between the current and the supply voltage is $\varphi$.
Assume,$\pi \sqrt{3} \approx 5$.
$(1)$ The value of $C$ is . . . . . .
$(2)$ The value of $\varphi$ is
Give the answers of the questions $(1)$ and $(2)$:

$A$ sinusoidal voltage $V(t) = 210 \sin(3000t) \text{ V}$ is applied to a series $LCR$ circuit in which $L = 10 \text{ mH}$,$C = 25 \mu\text{F}$,and $R = 100 \Omega$. The phase difference $(\Phi)$ between the applied voltage and resultant current will be

In the $A$.$C$. circuit shown,keeping switch $K$ closed,if an iron rod is inserted into the coil,the bulb in the circuit: