In the figure shown, if the internal resistance of the battery is $1\, \Omega$, the reading of the ammeter will be ................. $A$.

To determine the resistance $(R)$ of a wire,a circuit is designed as shown below. The $V-I$ characteristic curve for this circuit is plotted for the voltmeter and the ammeter readings as shown in the figure. The value of $R$ is . . . . . . . $\Omega$.

The effective resistance between $A$ and $B$ of the shown network,where the resistance of each resistor is $R$,is

$R_1$ and $R_2$ are two resistors made of different materials. The temperature coefficient of resistance for $R_1$ is $\alpha$ and for $R_2$ is $-\beta$. If the resistance of the series combination of $R_1$ and $R_2$ does not change with temperature,then the ratio of the resistances of the two wires is:

What should be the relationship between the values of the three resistors shown in the figure so that they produce equal heat energy?

When a resistor of $11 \Omega$ is connected in series with an electric cell,the current flowing in it is $0.5 \ A$. Instead,when a resistor of $5 \Omega$ is connected to the same electric cell in series,the current increases by $0.4 \ A$. The internal resistance of the cell is (in $Omega$)