In the circuit given below, V(t) is the sinus | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) In the positive half-cycle of the input $V(t)$, diode $D_1$ is forward-biased and $D_2$ is reverse-biased. The current flows through $R_1$ and $R$

Vedclass · Accepted Answer

Has different peak values during positive and negative half-cycles

Vedclass · Answer

(D) In the positive half-cycle of the input $V(t)$, diode $D_1$ is forward-biased and $D_2$ is reverse-biased. The current flows through $R_1$ and $R$. The voltage drop across $R$ is determined by the voltage divider rule: $V_{AB, pos} = V(t) \cdot \frac{R}{R + R_1}$.In the negative half-cycle of the input $V(t)$, diode $D_2$ is forward-biased and $D_1$ is reverse-biased. The current flows through $R_2$ and $R$. The voltage drop across $R$ is: $V_{AB, neg} = |V(t)| \cdot \frac{R}{R + R_2}$.Since $R_1 = 100 \ \Omega$ and $R_2 = 150 \ \Omega$ are different, the peak voltage values across $R$ during the positive and negative half-cycles will be different.Therefore, the output is not rectified, and it has different peak values during the positive and negative half-cycles.

In the circuit given below, $V(t)$ is the sinusoidal voltage source. The voltage drop $V_{AB}(t)$ across the resistance $R$ is:

Similar Questions

The energy of a photon of sodium light $(\lambda = 589 \text{ nm})$ is equal to the band gap of a semiconductor. Find the minimum energy $E$ in $eV$ required to create an electron-hole pair.

Three amplifiers with voltage gains $10, 20$ and $30$ are connected in series. If the input signal has a peak value of $1 mV$, then the peak value of the output voltage is (in $\,V$)

Identify the semiconductor devices whose characteristics are given below,in the order $(a), (b), (c), (d)$.

In which of the following cases is the junction diode $NOT$ in reverse bias?

Vedclass Test Series

Exam Paper Generator

Online Exam Module