In an $A.C.$ circuit,a resistance '$R$' is connected in series with an inductance '$L$'. If the phase angle between voltage and current is $45^{\circ}$,the value of inductive reactance will be $(\tan 45^{\circ} = 1)$.

An alternating voltage is applied to a series $LCR$ circuit. If the current leads the voltage by $45^{\circ}$,then $\left(\tan 45^{\circ}=1\right)$:

$A$ series $R-C$ combination is connected to an $AC$ voltage of angular frequency $\omega = 500 \ rad/s$. If the impedance of the $R-C$ circuit is $R\sqrt{1.25}$,the time constant (in $ms$) of the circuit is:

When an $AC$ source of emf $E$ with angular frequency $\omega = 100 \text{ rad/s}$ is connected across a circuit,the phase difference between $E$ and current $I$ in the circuit is observed to be $\frac{\pi}{4}$ as shown in the figure. If the circuit consists of only $RC$ or $RL$ in series,then:

An induction coil has an impedance of $10 \Omega$. When an $AC$ signal of frequency $1000 \ Hz$ is applied to the coil,the voltage leads the current by $45^\circ$. The inductance of the coil is

In an $L-R$ circuit,the value of $L$ is $(\frac{0.4}{\pi}) \, H$ and the value of $R$ is $30 \, \Omega$. If an alternating e.m.f. of $200 \, V$ at $50 \, Hz$ is connected to the circuit,what are the impedance and the current in the circuit?