The figure shows a metal rod $PQ$ resting on the smooth rails $AB$ and positioned between the poles of a permanent magnet. The rails,the rod,and the magnetic field are in three mutually perpendicular directions. $A$ galvanometer $G$ connects the rails through a switch $K$. Length of the rod $= 15 \; cm$,$B = 0.50 \; T$,resistance of the closed loop containing the rod $= 9.0 \; m\Omega$. Assume the field to be uniform.
$(a)$ Suppose $K$ is open and the rod is moved with a speed of $12 \; cm \; s^{-1}$ in the direction shown. Give the polarity and magnitude of the induced $emf$.
$(b)$ Is there an excess charge built up at the ends of the rod when $K$ is open? What if $K$ is closed?
$(c)$ With $K$ open and the rod moving uniformly,there is no net force on the electrons in the rod $PQ$ even though they do experience magnetic force due to the motion of the rod. Explain.
$(d)$ What is the retarding force on the rod when $K$ is closed?
$(e)$ How much power is required (by an external agent) to keep the rod moving at the same speed $(= 12 \; cm \; s^{-1})$ when $K$ is closed? How much power is required when $K$ is open?
$(f)$ How much power is dissipated as heat in the closed circuit? What is the source of this power?
$(g)$ What is the induced $emf$ in the moving rod if the magnetic field is parallel to the rails instead of being perpendicular?

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(A) Given: Length of the rod,$l = 15 \; cm = 0.15 \; m$,Magnetic field strength,$B = 0.50 \; T$,Resistance of the closed loop,$R = 9.0 \; m\Omega = 9.0 \times 10^{-3} \; \Omega$,Speed of the rod,$v = 12 \; cm \; s^{-1} = 0.12 \; m \; s^{-1}$.
$(a)$ Induced $emf$ $e = Bvl = 0.50 \times 0.12 \times 0.15 = 9 \times 10^{-3} \; V = 9 \; mV$. By Fleming's Right-Hand Rule,the polarity is such that end $P$ is positive and end $Q$ is negative.
$(b)$ When $K$ is open,an excess charge builds up at the ends of the rod due to the separation of charges by the magnetic Lorentz force. When $K$ is closed,the current flows continuously,so the excess charge is maintained by the current flow.
$(c)$ When $K$ is open,the magnetic force on the electrons is balanced by the electric force due to the accumulated charges at the ends of the rod. Thus,the net force on the electrons is zero.
$(d)$ Retarding force $F = IBl$. Current $I = e/R = (9 \times 10^{-3} \; V) / (9 \times 10^{-3} \; \Omega) = 1 \; A$. Thus,$F = 1 \times 0.50 \times 0.15 = 0.075 \; N = 75 \; mN$.
$(e)$ When $K$ is closed,power $P = Fv = 0.075 \times 0.12 = 9 \times 10^{-3} \; W = 9 \; mW$. When $K$ is open,no current flows,so no power is required to maintain the motion (ignoring friction).
$(f)$ Power dissipated as heat $P = I^2R = (1)^2 \times 9 \times 10^{-3} = 9 \; mW$. The source of this power is the external agent moving the rod.
$(g)$ If the magnetic field is parallel to the rails,the velocity vector is parallel to the magnetic field vector. Thus,$e = Bvl \sin(\theta) = 0$,as $\theta = 0^\circ$.

Explore More

Similar Questions

$A$ conductor $ABOCD$ moves along its bisector with a velocity of $1\, m/s$ through a perpendicular magnetic field of $1\, wb/m^2$,as shown in the figure. If all the four segments $(OB, BC, OC, CD)$ are of $1\, m$ length each,then the induced emf between points $A$ and $D$ is......$volt$.

$A$ metallic square loop $ABCD$ is moving in its own plane with velocity $v$ in a uniform magnetic field perpendicular to its plane as shown in the figure. An electric field is induced:

$A$ $1 \ m$ long metal rod $AB$ completes the circuit as shown in the figure. The area of the circuit is perpendicular to the magnetic field of $0.10 \ T$. If the resistance of the total circuit is $2 \ \Omega$,then the force needed to move the rod towards the right with a constant speed $(v)$ of $1.5 \ m/s$ is . . . . . . $N$.

$A$ rod of length $2 \, m$ slides with a speed of $5 \, ms^{-1}$ on a rectangular conducting frame as shown in the figure. There exists a uniform magnetic field of $0.04 \, T$ perpendicular to the plane of the figure. If the resistance of the rod is $3 \, \Omega$, the current through the rod is

$A$ conducting bar is pulled with a constant speed $v$ on a smooth conducting rail. The region has a steady magnetic field of induction $B$ as shown in the figure. If the speed of the bar is doubled then the rate of heat dissipation will

Difficult
View Solution

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo