Consider the configuration of a stationary water tank of cross-sectional area $A_{0}$ and a small bucket as shown in the figure below. What is the speed $v$ (in $m/s$) of the bucket so that the water leaking out of a hole of cross-sectional area $A$ (as shown) from the water tank does not fall outside the bucket? (Take $h=5 \, m$,$H=5 \, m$,$g=10 \, m/s^{2}$,$A=5 \, cm^{2}$,and $A_{0}=500 \, cm^{2}$).

  • A
    $1$
  • B
    $0.5$
  • C
    $0.1$
  • D
    $0.05$

Explore More

Similar Questions

$A$ tank with vertical walls is mounted so that its base is at a height $H$ above the horizontal ground. The tank is filled with water to a depth $h$. $A$ hole is punched in the side wall of the tank at a depth $x$ below the water surface. To have maximum range of the emerging stream,the value of $x$ is

For the shown diagram,find the ratio of $R_1: R_2$.

$A$ cylinder contains water up to a height '$H$'. It has three orifices $O_1, O_2, O_3$ as shown in the figure. Let $V_1, V_2, V_3$ be the speed of efflux of water from the three orifices. Then

Two large,identical water tanks,$1$ and $2$,kept on the top of a building of height $H$,are filled with water up to height $h$ in each tank. Both the tanks contain an identical hole of small radius on their sides,close to their bottom. $A$ pipe of the same internal radius as that of the hole is connected to tank $2$,and the pipe ends at the ground level. When the water flows out of tanks $1$ and $2$ through the holes,the times taken to empty the tanks are $t_1$ and $t_2$,respectively. If $H = (16/9) h$,then the ratio $t_1 / t_2$ is:

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo