An $AC$ voltage source of $E = 150 \sin(100t)$ is used to run a device which offers a resistance of $20 \,\Omega$ and restricts the flow of current in one direction only. The $r.m.s.$ value of current in the circuit will be.....$A$

$A$ choke coil is preferred to a $Rheostat$ in $AC$ circuits because:

You are given many resistances,capacitors and inductors. These are connected to a variable $DC$ voltage source (the first two circuits) or an $AC$ voltage source of $50 \ Hz$ frequency (the next three circuits) in different ways as shown in Column $II$. When a current $I$ (steady state for $DC$ or rms for $AC$) flows through the circuit,the corresponding voltage $V_1$ and $V_2$ (indicated in circuits) are related as shown in Column $I$. Match the two.

$A$ $\frac{2.5}{\pi} \mu F$ capacitor and $3000 \, \Omega$ resistor are joined in series to an $AC$ source of $200 \, V$ and $50 \, Hz$ frequency. The power factor of the circuit and the power dissipated in it will respectively be:

If $L, C$ and $R$ represent inductance,capacitance and resistance respectively,then which of the following does not represent the dimensions of frequency?

Match the List-$I$ with List-$II$.

List-$I$	List-$II$
$A$. $AC$ generator	$I$. Presence of both $L$ and $C$
$B$. Transformer	$II$. Electromagnetic Induction
$C$. Resonance phenomenon to occur	$III$. Quality factor
$D$. Sharpness of resonance	$IV$. Mutual Inductance

Choose the correct answer from the options given below: