A vertical hanging bar of length l and mass m | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Tensile stress is defined as the ratio of the tension force at a point to the cross-sectional area $A$ of the bar.At a distance $x$ from the top s

Vedclass · Accepted Answer

$\frac{Mg + mg(l-x)}{A}$

Vedclass · Answer

(B) Tensile stress is defined as the ratio of the tension force at a point to the cross-sectional area $A$ of the bar.At a distance $x$ from the top support,the tension in the bar is equal to the total weight acting below that point.The length of the bar below the point at distance $x$ is $(l-x)$.The mass of this portion of the bar is $m 	imes (l-x)$.The weight of this portion is $mg(l-x)$.The load $M$ at the bottom also contributes to the tension,with a weight of $Mg$.Therefore,the total tension $T$ at distance $x$ is $T = Mg + mg(l-x)$.The tensile stress $\sigma$ is given by $\sigma = \frac{T}{A} = \frac{Mg + mg(l-x)}{A}$.

$A$ vertical hanging bar of length $l$ and mass $m$ per unit length carries a load of mass $M$ at its lower end. Its upper end is clamped to a rigid support. The tensile stress at a distance $x$ from the support is (where $A$ is the area of cross-section of the bar):

Similar Questions

$A$ tangential force of $100 \,N$ is applied on the top face of a cubic block of side $0.1 \,m$. If the top face is displaced by $0.02 \,cm$ relative to the bottom face,what is the tangential strain?

$A$ wire of length $40 \text{ cm}$ is stretched by $0.1 \text{ cm}$. The strain on the wire is

Check if the following statements are True or False:
$(a)$ Shear modulus of liquid is infinite.
$(b)$ For a given load (external force),steel is more deformed than rubber.
$(c)$ When a solid body is beaten,rolled,heated,or cooled,its elastic properties are affected.

Why is rubber used to make cycle seats instead of wood or iron?

Vedclass Test Series

Exam Paper Generator

Online Exam Module