$A$ square aluminium (shear modulus is $25 \times 10^{9} \, N m^{-2}$) slab of side $60 \, cm$ and thickness $15 \, cm$ is subjected to a shearing force (on its narrow face) of $18.0 \times 10^{4} \, N$. The lower edge is riveted to the floor. The displacement of the upper edge is $....... \mu m$.

$A$ rubber cube of side $5 \ cm$ has one face fixed while a tangential force $1800 \ N$ is applied on its opposite face. If the modulus of rigidity of rubber is $2.4 \times 10^6 \ N \ m^{-2}$,then the lateral displacement of the strained face is $......$ . (in $mm$)

Steel ruptures when a shear stress of $3.5 \times 10^8 \, N \, m^{-2}$ is applied. The force needed to punch a $1 \, cm$ diameter hole in a steel sheet $0.3 \, cm$ thick is nearly:

The modulus of rigidity of diamond is:

The ratio of lengths of two rods $A$ and $B$ of the same material is $1:2$ and the ratio of their radii is $2:1$. What is the ratio of the modulus of rigidity of $A$ and $B$ (in $:1$)?

Given below are two statements: One is labelled as Assertion $(A)$ and the other is labelled as Reason $(R)$.
Assertion $(A)$: The stretching of a spring is determined by the shear modulus of the material of the spring.
Reason $(R)$: $A$ coil spring of copper has more tensile strength than a steel spring of same dimensions.
In the light of the above statements,choose the most appropriate answer from the options given below: