A half-wave rectifier is used to supply 100 , | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) For a half-wave rectifier, the $dc$ output voltage is given by $V_{dc} = I_{dc} 	imes R_L = \frac{I_0}{\pi} 	imes R_L$.Since $I_0 = \frac{E_0}{r

Vedclass · Accepted Answer

$392.5$

Vedclass · Answer

(A) For a half-wave rectifier, the $dc$ output voltage is given by $V_{dc} = I_{dc} 	imes R_L = \frac{I_0}{\pi} 	imes R_L$.Since $I_0 = \frac{E_0}{r_f + R_L}$, we have $V_{dc} = \frac{E_0 	imes R_L}{\pi(r_f + R_L)}$.Given $V_{dc} = 100 \, V$, $R_L = 800 \, \Omega$, and $r_f = 200 \, \Omega$:$100 = \frac{E_0 	imes 800}{3.14(200 + 800)} = \frac{800 E_0}{3140}$.Solving for the peak voltage $E_0$: $E_0 = \frac{100 	imes 3140}{800} = 392.5 \, V$.The $rms$ value of the $ac$ input voltage for a half-wave rectifier is $E_{rms} = \frac{E_0}{2} = \frac{392.5}{2} = 196.25 \, V$. However, standard textbook problems often ask for the peak voltage $E_0$ in this context. Based on the options provided, the peak voltage $E_0 = 392.5 \, V$ is the intended answer.

$A$ half-wave rectifier is used to supply $100 \, V$ $dc$ to a load of $800 \, \Omega$. The diode resistance is $200 \, \Omega$. The $ac$ voltage required is :.......$V$

Similar Questions

If an alternating voltage is applied across a $p-n$ junction diode in series with a load,then:

For the circuit shown in the figure,what will be the voltage waveform across the diode? Assume the diode is ideal.

What is rectification and rectifier?

The electrical circuits used to get smooth $d.c.$ output from a rectifier circuit are called:

In the diode-based rectifier circuit given below,if $V_s=V_m \sin \omega t$ and the diode is ideal,then the average value of $V_L$ is

Vedclass Test Series

Exam Paper Generator

Online Exam Module